| 低密度材料射流形成过程的数值模拟 |
| |
| 引用本文： | 刘同鑫,尹建平,王志军,伊建亚. 低密度材料射流形成过程的数值模拟[J]. 兵器材料科学与工程, 2014, 0(5): 63-66 |
| |
| 作者姓名： | 刘同鑫 尹建平 王志军 伊建亚 |
| |
| 作者单位： | 中北大学机电工程学院; |
| |
| 基金项目： | 山西省高等学校科技创新项目(2013131) |
| |
| 摘 要： | 为研究在炸药爆轰作用下低密度材料形成射流的过程,采用AUTODYN有限差分软件,对低密度材料尼龙和特氟龙药型罩的成型特性做对比,得出在相同的时间下,形成射流的长度尼龙大于特氟龙,但特氟龙药型罩形成的射流一致性较好;并与广泛使用的高密度铜药型罩的成型对比,对不同时刻射流的形态及速度进行分析,得出低密度材料形成的射流有能量低、稳定性好、射流长径比较大的性质,所以对爆炸反应装甲穿而不爆有显著优势。
|
| 关 键 词： | 爆炸力学 低密度材料 射流 数值模拟 |
Numerical simulation of jet formation process for low-density materials |
| |
| LIU Tongxin;YIN Jianping;WANG Zhijun;YI Jianya. Numerical simulation of jet formation process for low-density materials[J]. Ordnance Material Science and Engineering, 2014, 0(5): 63-66 |
| |
| Authors: | LIU Tongxin YIN Jianping WANG Zhijun YI Jianya |
| |
| Affiliation: | LIU Tongxin;YIN Jianping;WANG Zhijun;YI Jianya;School of Mechatronic Engineering,North University of China; |
| |
| Abstract: | In order to study jet formation process for low- density material under detonation,the finite difference softwareAUTODYN was used to make a comparison of molding characteristics between low-density material nylon and Teflon liner. It isconcluded that the length of the jet formed by nylon is greater than that by Teflon,but jet formation consistency of Teflon liner isbetter. Compared with high-density molded copper liner,the shape and velocity of the jet were analyzed at the different time,thejet formed by low- density material has low energy,good stability,large ratio of length to diameter,so it has significantadvantages in penetrating explosive reaction armor. |
| |
| Keywords: | explosion mechanics low-density material jet numerical simulation |
| 本文献已被 CNKI 等数据库收录！ |
|
