| 低温离子渗硫层的干摩擦学性能对比研究 |
| |
| 引用本文： | 王海斗,庄大明,王昆林,刘家浚,方晓东,李永良.低温离子渗硫层的干摩擦学性能对比研究[J].材料热处理学报,2002,23(4):30-33. |
| |
| 作者姓名： | 王海斗 庄大明 王昆林 刘家浚 方晓东 李永良 |
| |
| 作者单位： | 1. 清华大学机械工程系,北京,100084
2. 北京水利水电学校,北京,100024 |
| |
| 摘 要： | 采用低温离子渗硫工艺，分别在W6Mo5Cr4V2,5CrNiMo,2Cr13及45钢表面制备FeS固体润滑层。研究干摩擦条件下的摩擦员性能和渗硫层截面与磨痕形貌，结果表明，4种钢渗硫后减磨耐磨性能都明显提高，其中渗硫W6Mo5Cr4V2钢的摩擦学性能最好，渗硫5CrNiMo钢、渗硫45钢及渗硫2Cr13钢的摩擦学性能依次降低，基体硬度及组织结构不同是渗硫层摩擦学性能产生差异的主要原因。
|
| 关 键 词： | 离子渗碱 硫化亚铁 干摩擦 摩擦磨损 |
| 文章编号： | 1009-6264(2002)04-0030-04 |
A Comparative Study on Wear-resistance of Ion Sulfide Layers of Different Steels |
| |
| WANG Hai-dou,ZHUANG Da-ming,WANG Kun-lin,LIU Jia-jun.A Comparative Study on Wear-resistance of Ion Sulfide Layers of Different Steels[J].Transactions of Materials and Heat Treatment,2002,23(4):30-33. |
| |
| Authors: | WANG Hai-dou ZHUANG Da-ming WANG Kun-lin LIU Jia-jun |
| |
| Abstract: | The low temperature ion sulfuration technique was utilized to prepare the sulfide (FeS) solid lubrication layers on the surface of high-speed steel, die steel, stainless steel and 45 steel. The tribological properties of the sulfide layers were investigated on a ring-on-block tester under dry sliding condition. The morphologies and microstructures of the layers were analyzed. The results showed that the friction-reduction and wear-resistance of all sulfuration steels were improved remarkably. The extend of improved friction-reduction and wear-resistance of four sulfurized steels from high to low can be ranked by the order high speed steel-die steel-plain carbon steel-stainless steel. The differences of friction-reduction and wear-resistance with different steels were mainly determined by substrate hardness and substrate microstructure. |
| |
| Keywords: | ion sulfuration FeS dry friction friction and wear |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
