| 无机房电梯的一种平层标识救援方法 |
| |
| 引用本文： | 彭波,陈俊林,向佳著. 无机房电梯的一种平层标识救援方法[J]. 中国电梯, 2014, 0(18): 64-65 |
| |
| 作者姓名： | 彭波 陈俊林 向佳著 |
| |
| 作者单位： | 湖南省特种设备检验检测研究院张家界分院 |
| |
| 摘 要： | 某建筑物安装有一台无机房电梯，因受现场条件限制．原有的曳引钢丝绳平层标识达不到应急救援的要求，故综合现场实际情况。提出了一种在限速器钢丝绳上设置平层标识的新方法．通过采用该方法．使得整改后满足了应急救援要求。
|
| 关 键 词： | 无机房电梯 限速器钢丝绳 平层标识 松闸扳手 |
A FLAT LAYER LOGO RESCUE METHOD OF MRL ELEVATOR |
| |
| Peng Bo,Chen Junlin,Xiang Jiazhu. A FLAT LAYER LOGO RESCUE METHOD OF MRL ELEVATOR[J]. China Elevator, 2014, 0(18): 64-65 |
| |
| Authors: | Peng Bo Chen Junlin Xiang Jiazhu |
| |
| Affiliation: | Peng Bo, Chen Junlin, Xiang Jiazhu |
| |
| Abstract: | A building is equipped with a elevator without machine room. Due to site constraints, the original dray rope fiat layer logo doesn＇t satisfy the emergency rescue requirements. So a new method which is used to set the flat layer logo on the governor rope been proposed based on the actual condition. By this way the rectification meets the emergency rescue requirement. |
| |
| Keywords: | Elevator Without Machine Room Governor Rope Flat Layer Logo Loose Brake Lever |
| 本文献已被 维普 等数据库收录！ |
