|
|||||
|
|
| 油水两相流中2种含水率计算模型比较 | |
| 引用本文： | 李利品,党瑞荣,黄燕群,高国旺. 油水两相流中2种含水率计算模型比较[J]. 仪器仪表学报, 2012, 33(4): 924-929 |
| 作者姓名： | 李利品 党瑞荣 黄燕群 高国旺 |
| 作者单位： | 1. 西北工业大学 西安710072;西安石油大学光电油气测井与检测教育部重点实验室 西安710065 2. 西安石油大学光电油气测井与检测教育部重点实验室 西安710065 3. 中国兵器工业第203研究所 西安710065 |
| 基金项目： | 国家科技重大专项(2008ZX05026-001-03);陕西省教育厅(2010JK781)资助项目 |
| 摘 要： | 油水两相流广泛存在于石油开采、储运、化工、能源等工业领域。含水率是油水两相流系统的重要参数之一,含水率的准确测量不仅与采用的测量方法有关,而且还与计算模型有很大关系。结合电导式测量方法建立了电阻-电容并联网络含水率计算模型,并在3种流型下与Maxwell含水率模型进行了仿真和实验对比。结果表明,建立的并联电阻-电容网络含水率模型,在泡状流下与Maxwell含水率计算模型的误差基本相同,而在环状流、分层流下,测试误差均小于Maxwell含水率计算模型的误差,具有更高的测试精度,可适用于环状流、分层流、泡状流等流型。 |
| 关 键 词： | 并联电阻-电容模型 Maxwell模型 含水率 油水两相流 |
Comparison of two water-fraction calculation models in oil-water two-phase flow |
|
| Li Lipin , Dang Ruirong , Huang Yanqun , Gao Guowang. Comparison of two water-fraction calculation models in oil-water two-phase flow[J]. Chinese Journal of Scientific Instrument, 2012, 33(4): 924-929 | |
| Authors: | Li Lipin Dang Ruirong Huang Yanqun Gao Guowang |
| Affiliation: | 1 Northwestern Polytechnical University,Xi’an 710072,China;2 Key Laboratory of Photoelectric Logging and Detecting of Oil and Gas,Ministry of Education,Xi’an Shiyou University,Xian 710065,China; 3 No.203 Research Institute of China Ordnance Industries,Xi’an 710065,China) |
| Abstract: | Oil-water two-phase flow exists widely in oil exploration,storage and transportation,chemical engineering,energy resource and other industrial fields.Water fraction is one of the important parameters in oil-water two-phase system.Accurate measurement of water fraction is related not only to measurement method,but also to calculation model.Using conductance measurement method,a water fraction calculation model was built based on parallel resistance-capacitance network.And the simulation and experiment results are compared with those applying Maxwell calculation model for 3 different flow patterns.Simulation and experiment results show that the measurement errors are basically identical for the parallel resistance-capacitance network model and Maxwell model in bubble flow.While the errors using parallel resistance-capacitance network model are lower than those using Maxwell model in annular flow and stratified flow.Therefore the parallel resistance-capacitance network model has higher precision for water-fraction calculation than Maxwell model and is suitable for annular flow,stratified flow and bubble flow. |
| Keywords: | parallel resistance-capacitance model Maxwell model water fraction oil-water two-phase flow |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |