| 成型压力对合成CaZrO3材料性能的影响 |
| |
| 引用本文： | 沈大卫,游杰刚,高配亮,张国栋.成型压力对合成CaZrO3材料性能的影响[J].耐火与石灰,2013(5):5-6,10. |
| |
| 作者姓名： | 沈大卫 游杰刚 高配亮 张国栋 |
| |
| 作者单位： | 辽宁科技大学高温材料与镁资源工程学院，鞍山 114051; 辽宁省镁质材料工程中心，鞍山 114051 |
| |
| 摘 要： | 以电熔ZrO2粉和活性石灰粉为原料,研究了不同成型压力对合成CaZrO3的影响,并利用XRD和SEM对材料的矿物相和微观结构进行了分析。实验结果表明:随着成型压力的增加,试样的致密程度加大;当成型压力达到200MPa后,成型压力对合成锆酸钙材料的致密度影响减弱。成型压力对合成锆酸钙材料的矿物相无影响,对材料的显微结构影响甚微。综合分析,适宜的成型压力为200MPa。
|
| 关 键 词： | CaZrO3 成型压力 显微结构 电熔ZrO2粉 活性石灰粉 |
Imp act of form in g pressure to performanec s of synthesized CaZrO3 |
| |
| Shen Dawei
,
You Jiegang
,
Gao Peiliang
,
Zhang Guodong.Imp act of form in g pressure to performanec s of synthesized CaZrO3[J].Foreign Refractories,2013(5):5-6,10. |
| |
| Authors: | Shen Dawei You Jiegang Gao Peiliang Zhang Guodong |
| |
| Affiliation: | ＇2 ( 1. College of High-Temperature Material and Magnesium Resource Engineering of Liaoning University of Science and Technology, Anshan 114051, China; 2. Engineering Center of Magnesia Materials of Liaoning Province, Anshan 114051, China) |
| |
| Abstract: | This paper studies the impact of forming pressure to performances of synthesized CaZrO3 , which is made of fused zirconia powder and active lime powder as raw materials, and analyses the mineral facies and microstructure by XRD and SEM. The results show that density increases with the forming pressure going up;when the pressure reaches up to 200MPa, its effect on density becomes weak;the pressure has no effect on mineral facies and little effect on microstructure. In conclusion, the optimal forming pressure value is 200MPa. |
| |
| Keywords: | CaZrO3 Forming pressure Microstructure Fused zirconia powder Active lime powder |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
