| 铝电解槽槽壳侧部散热计算方法的研究 |
| |
| 引用本文： | 崔大光. 铝电解槽槽壳侧部散热计算方法的研究[J]. 甘肃冶金, 2006, 28(1): 21-24 |
| |
| 作者姓名： | 崔大光 |
| |
| 作者单位： | 中南大学,能源科学与工程学院,湖南,长沙,410083 |
| |
| 摘 要： | 本文借助ANSYS有限元分析软件,对某厂240 kA预焙阳极铝电解槽槽壳侧部散热进行研究,建立半槽切片有限元解析模型,对其电、热场进行耦合计算。该模型的计算结果与实测值吻合较好(槽壳各区域表面温度偏差在4℃以内),所计算的侧部散热量与实测值基本相符,与传统的公式计算相比,更能真实地反映铝电解槽实际运行的散热状况,为铝电解槽能量平衡的研究与优化设计提供精确、快速的研究手段。
|
| 关 键 词： | 铝电解槽 槽壳 侧部散热 数值仿真 电热场 |
| 文章编号： | 1672-4461(2006)01-0021-03 |
| 修稿时间： | 2005-11-06 |
Study on the Computing Method of the Heat Transfer from Aluminium Reduction Cell Shells |
| |
| CUI Da-guang. Study on the Computing Method of the Heat Transfer from Aluminium Reduction Cell Shells[J]. Gansu Metallurgy, 2006, 28(1): 21-24 |
| |
| Authors: | CUI Da-guang |
| |
| Abstract: | The 2D finite element model of the half of aluminum reduction cell is built and the thermal-electric field of the cell is computed according to the finite element analysis software ANSYS.A 240 kA baked anode aluminum reduction cell is analyzed and researched by using the model.The results show that the simulation results coincide with the tested data(the temperature on shell surfaces less than 4 ℃),and the heat dissipation accord with the practical status of aluminum reduction cells compared with traditional formulae.And it provides accurate and double-quick methods for study on energy balance of aluminum reduction cells. |
| |
| Keywords: | aluminum reduction cells aluminum reduction cell shells heat dissipation numerical simulation thermalelectric field |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
