| 摩托车档位齿轮精锻模设计 |
| |
| 引用本文： | 夏华,黄虹,赵军华,胡亚民. 摩托车档位齿轮精锻模设计[J]. 模具工业, 2005, 0(7): 43-45 |
| |
| 作者姓名： | 夏华 黄虹 赵军华 胡亚民 |
| |
| 作者单位： | 重庆工学院,重庆,400050 |
| |
| 摘 要： | 介绍了摩托车档位齿轮温精锻模的结构,该模具采用碟形弹簧式预压分流结构和型腔齿爪部位独特的镶块排气结构,实现了在毛坯剪切下料条件下的档位齿轮温精锻成形。
|
| 关 键 词： | 档位齿轮 温精锻 模具 |
| 文章编号： | 1001-2168(2005)07-0043-03 |
| 收稿时间： | 2005-02-15 |
| 修稿时间： | 2005-02-15 |
Design of the Fine Forging Die for the Gearshift Gears of Motorcycles |
| |
| XIA Hua,HUANG Hong,ZHAO Jun-hua,HU Ya-min. Design of the Fine Forging Die for the Gearshift Gears of Motorcycles[J]. Die & Mould Industry, 2005, 0(7): 43-45 |
| |
| Authors: | XIA Hua HUANG Hong ZHAO Jun-hua HU Ya-min |
| |
| Abstract: | The structure of the warm fine forging die for the gearshift gears of motorcycles is introduced.The disc-spring pre-pressing shunt structure and the special insert-block venting structure at the cavity hock part are adopted for the die,so as to realize fine forging of the gearshift gears under the condition of laying off the blanks by blanking. |
| |
| Keywords: | gearshift gear warm fine forging die |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
