首页 | 本学科首页   官方微博 | 高级检索  
     

嵌岩桩竖向承载力的研究
引用本文:史佩栋,梁晋渝.嵌岩桩竖向承载力的研究[J].岩土工程学报,1994,16(4):32-39.
作者姓名:史佩栋  梁晋渝
作者单位:浙江省建筑科学研究院;成都市建筑设计研究院;
摘    要:综合研究了国内外20余年来对本课题的研究所取得的进展。通过对150例现场实测资料和两例原位长期观测资料的分析,得出了嵌岩桩在竖向荷载下桩端阻力分担荷载比(Q_b/Q)随桩的长径比(L/d)而变化的一般规律,这些规律与通常认为嵌岩桩均属端承桩的传统观念迥然不同。并阐述了形成这些规律的机理;探讨了不同长径比的嵌岩桩可能成为端承桩或摩擦端承桩的必要条件,以及嵌岩桩适宜的嵌岩深度。认为当不符合所述条件时,桩一般不宜嵌入中等风化程度以上的岩层。最后,提出了能反映上述规律,而用经验参数确定嵌岩桩竖向承载力的合理的计算通式。

关 键 词:嵌岩桩  竖向承载力  摩阻力  端阻力  分担荷载比  长径比  嵌岩深度  

Vertical Bearing Capacity of Rock-socketed Piles
Shi Peidong,Liang Jinyu.Vertical Bearing Capacity of Rock-socketed Piles[J].Chinese Journal of Geotechnical Engineering,1994,16(4):32-39.
Authors:Shi Peidong  Liang Jinyu
Affiliation:Zhejiang Academy of Building Research Hangzhou Chengdu Institute of Building Design Research
Abstract:This paper summarizes 20 years developments at home and abroad on the given subject.Througj analyzing 150 cases of field test results and 2 cases of long-term in-situ observations,somegeneral relationships between the base resistance/pile capacity ratio (Q_b/Q)of rock-socketed pilesunder vertical load and their length/diamter ratio(L/d)are found.They are quite in contrast with theconventional concept that rock-socketed piles are all end-bearing in nature. Mechanism that governs thementioned relationships is explained and the necessary conditions and appropriate socket lengths forrock-socketed piles of different L/d ratios to be end-bearing or frictional end-bearing are discussed.Piles not satisfyng the conditions are unnecessary to be socketed into any rock superior to moderatelyweathered stage. Finally,a general formula with empirical paranleters for reasonably determining thevertical bearing capacitu of rock-socketed piles is presented.
Keywords:rock-sodcketed pile  vertical bearing capacity  shaft resistance  base resistance  share ofload  length to diameter ratio  socket length  
本文献已被 CNKI 维普 等数据库收录!
点击此处可从《岩土工程学报》浏览原始摘要信息
点击此处可从《岩土工程学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号