首页 | 本学科首页   官方微博 | 高级检索  
     

微波辐射法合成阴离子型聚丙烯酰胺
引用本文:黄竹君,赵殊,吴宁,聂福贵,王非非.微波辐射法合成阴离子型聚丙烯酰胺[J].化学与粘合,2012(6):1-3,35.
作者姓名:黄竹君  赵殊  吴宁  聂福贵  王非非
作者单位:东北林业大学理学院黑龙江省阻燃材料分子设计与制备重点实验室
基金项目:国家科技支撑计划资助项目(编号:2006BAE03B06)
摘    要:以丙烯酰胺(AM)和丙烯酸钠(AA-Na)为原料,过硫酸铵为引发剂,N,N-亚甲基双丙烯酰胺为交联剂,用微波辐射进行水溶液聚合制备可溶解的阴离子型聚丙烯酰胺。探讨丙烯酸中和度、单体浓度、引发剂用量、交联剂用量及温度等对相对分子质量的影响。结果表明,单体浓度为19%,中和度为80%,引发剂用量为0.05%,交联剂用量为0.002%,反应温度35℃条件下合成的聚丙烯酰胺(PAM)的相对分子质量最高。

关 键 词:丙烯酰胺  丙烯酸钠  微波辐射  水溶液聚合

Synthesis of Anionic Polyacrylamide under Microwave Irradiation
HUANG Zhu-jun,ZHAO Shu,WU Ning,NIE Fu-gui and WANG Fei-fei.Synthesis of Anionic Polyacrylamide under Microwave Irradiation[J].Chemistry and Adhesion,2012(6):1-3,35.
Authors:HUANG Zhu-jun  ZHAO Shu  WU Ning  NIE Fu-gui and WANG Fei-fei
Affiliation:(Heilongjiang Key Laboratory of Molecule Design and Preparation of Flame Retardant Materials,College of Science,Northeast Forestry University,Harbin 150040,China)
Abstract:The soluble anionic polyacrylamide was synthesis by aqueous solution polymerization under microwave irradiation,the acrylamide and sodium acrylate were used as the monomers,the ammonium persulfate was used as an initiator and the N,N-methylene-bis-acrylamide was adopted as a crosslinking agent.The effect of neutralization degree of AA,monomer concentration,dosage of crosslinking agent and initiator,and the reaction temperature on the molecular weight were discussed.The optimum reaction conditions were found as follows: the monomer concentration was 19%,the neutralization degree of AA was 80%,the initiator dosage was 0.05%,the crosslinking agent dosage was 0.002% and the reaction temperature was 35℃.Under these conditions,the polyacrylamide with highest molecular weight was obtained.
Keywords:Acrylamide  sodium acrylate  microwave irradiation  aqueous solution polymerization
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号