| 铬钼合金化对高锰钢疲劳性能的影响 |
| |
| 引用本文： | 王辉,谭小东,刘兴刚,田学锋,陈晓刚,田锋,张国志.铬钼合金化对高锰钢疲劳性能的影响[J].沈阳黄金学院学报,2010(4):245-249. |
| |
| 作者姓名： | 王辉 谭小东 刘兴刚 田学锋 陈晓刚 田锋 张国志 |
| |
| 作者单位： | [1]东北大学材料与冶金学院,沈阳110004 [2]铁岭阀门（集团）特种阀门有限责任公司,辽宁铁岭112616 |
| |
| 摘 要： | 研究了铬钼合金化对高锰钢疲劳和耐磨性能的影响.旋转弯曲疲劳试验和疲劳断口分析结果表明,铬钼合金化后,高锰钢的抗拉强度和屈服强度都有所提高,而延伸率、冲击韧性和疲劳极限降低.在低循环应力条件下,Cr和Mo的质量分数分别为0.57%和0.34%的高锰钢的疲劳性能低于普通高锰钢,主要是弥散点状碳化物容易引发内部疲劳源,加快疲劳失效过程.
|
| 关 键 词： | 高锰钢 铬钼合金化 疲劳性能 S-N曲线 磨料磨损 |
Effects of Cr and Mo on fatigue property of ZGMn13 |
| |
| Affiliation: | WANG Hui,TAN Xiao-dong,LIU Xing-gang,TIAN Xue-feng,CHEN Xiao-gang,TIAN Feng,ZHANG Gui-zhi(1.School of Materials and Metallurgy,Northeastern University,Shenyang 110004,China;2.Tieling Special Valve Co.Ltd.,Tieling 112616,China) |
| |
| Abstract: | The effects of Cr-Mo alloying on the fatigue and wear-resistant properties of ZGMn13 were researched,the results of rotary bending fatigue testing and abrasive wear testing show that the strength and hardness of the high manganese steel increase by addition of Cr-Mo,and the wear-resistant properties of the high manganese steel with Cr-Mo is better than that of the high manganese steel without Cr-Mo.But the toughness and fatigue property of the high manganese steel with Cr-Mo is lower than that of the high manganese steel without Cr-Mo.The reason is that the dispersed carbides of Cr and Mo formed in the boundary could induce crack initiation.In the case of low cyclic stress,the fatigue performance of the high manganese steel with 0.57%Cr-0.341%Mo is not as good as the traditional high manganese steel. |
| |
| Keywords: | ZGMn13 Cr-Mo alloying fatigue property S-N curve wear resistance |
| 本文献已被 维普 等数据库收录！ |
|
