| EH36钢连铸坯角部横裂热模拟试验研究 |
| |
| 引用本文： | 窦力威,于赋志,魏国,丁智敏,沈峰满.EH36钢连铸坯角部横裂热模拟试验研究[J].沈阳黄金学院学报,2010(4):237-240. |
| |
| 作者姓名： | 窦力威 于赋志 魏国 丁智敏 沈峰满 |
| |
| 作者单位： | [1]东北大学材料与冶金学院,沈阳110004 [2]鞍钢股份有限公司技术中心,辽宁鞍山114001 |
| |
| 基金项目： | 国家自然科学基金资助项目（50474014） |
| |
| 摘 要： | 针对某钢厂EH36钢300 mm厚连铸板坯的角部横裂问题,应用Gleeble—3800热模拟试验机研究了EH36钢的缺口试样在结晶器与二冷矫直区分别产生裂纹的差异.研究表明,结晶器产生的裂纹特征与二冷矫直区产生的裂纹特征在氧化程度上有着显著差异,据此可以判定EH36钢300 mm厚连铸板坯的角部横裂产生位置,为调整工艺参数提供参考.
|
| 关 键 词： | 连铸 厚板坯 热模拟 角部横裂 结晶器 二冷区 |
Study of thermal simulation on transversal corner crack of EH36 slab |
| |
| Authors: | DOU Li-wei YU Fu-zhi WEI Guo DING Zhi-min SHEN Feng-man |
| |
| Affiliation: | 1.School of Materials ＆ Metallurgy,Northeastern University,Shenyang 110004,China 2.Technological Centre,Anshan Steel company limited,Anshan 114001,China) |
| |
| Abstract: | Experiments were carried out on the difference of original position for transversal corner cracks in EH36 slab samples with gaps by Gleeble-3800 thermal-mechanical simulator according the transversal corner cracks from EH36 slab in certain steel plant.It shows that there are remarkable differences in the crack characters on oxidation of the samples for original positions between the mold and the straightening segments of the secondary cooling zone by SEM analysis.So the original position can be determined for the transversal corner crack.Consequently,it is important to avoid the transversal corner cracks in 300 mm heavy slab of EH36. |
| |
| Keywords: | continuously cast heavy slab thermal simulation testing transversal corner crack mold secondary cooling zone |
| 本文献已被 维普 等数据库收录！ |
|
