首页 | 本学科首页   官方微博 | 高级检索  
     

摩擦喷射复合电沉积MoS2/Ni镀层结构与性能研究
引用本文:梁志杰,赵殿锋.摩擦喷射复合电沉积MoS2/Ni镀层结构与性能研究[J].中国表面工程,2005,18(5):28-30.
作者姓名:梁志杰  赵殿锋
作者单位:[1]全军装备表面工程重点实验室,北京100072 [2]装甲兵工程学院装备再制造工程系,北京100072
摘    要:利用摩擦喷射复合电沉积工艺在钢基材料上制备MoS2/Ni减摩复合镀层,观测分析了镀层形貌结构,并对其性能进行测试.研究表明,MoS2加入到镍镀层后,能显著改善镀层摩擦学性能,相同测试条件下,摩擦因数为同工艺纯镍镀层的1/4,磨损失重也仅为纯镍镀层的13 %.复合镀层磨损形式为磨粒磨损,除了有个别较浅、较窄磨痕之外,磨损表面较为光滑,没有出现粘着现象.

关 键 词:摩擦喷射复合电沉积  复合镀层  摩擦因数
文章编号:1007-9289(2005)05-0028-03
收稿时间:2005-09-05
修稿时间:2005-09-27

Microstructure and Properties of MoS2/Ni Coating Produced by Friction & Spray Electroplating Technology
LIANG Zhi-jie,ZHAO Dian-feng.Microstructure and Properties of MoS2/Ni Coating Produced by Friction & Spray Electroplating Technology[J].China Surface Engineering,2005,18(5):28-30.
Authors:LIANG Zhi-jie  ZHAO Dian-feng
Abstract:MoS2/Ni composite coating was prepared by friction & spray electroplating technology.Microstructure of the coating was observed and its properties were tested.Experimental results showed that MoS2 in the coating can improve its wear resistance obviously.At the same testing condition,the friction coefficient of composite coating was 1/4 that of pure-Nickel coating,the wear loss was only 13 percent that of the pure-Nickel coating.The wear mode of the composite coating was abrasion.Except few shallow and narrow tracks,the wear surface was smooth and there's no adherence.
Keywords:friction & spray electroplating technology  composite coating  friction coefficient
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《中国表面工程》浏览原始摘要信息
点击此处可从《中国表面工程》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号