| Cu/FeS复合材料的摩擦磨损性能 |
| |
| 引用本文： | 梁娜,康斌,陈敬超.Cu/FeS复合材料的摩擦磨损性能[J].润滑与密封,2007,32(10):90-92,96. |
| |
| 作者姓名： | 梁娜 康斌 陈敬超 |
| |
| 作者单位： | 1. 昆明理工大学稀贵及有色金属先进材料教育部重点实验室,云南省新材料制备与加工重点实验室,云南昆明,650093
2. 四川省冶金情报标准研究所,四川成都,610041 |
| |
| 基金项目： | 云南省应用基础研究计划重点项目 |
| |
| 摘 要： | 采用原位反应合成法制备的Cu/FeS复合材料经真应变为6.4的挤压变形加工后,对其摩擦磨损性能进行研究。并利用扫描电镜观察磨损后试样的形貌,分析该材料磨损过程中的影响因素及磨损机制。结果表明,无论是试验过程中的载荷、滑动速度,还是材料本身的硬度都将影响材料的磨损性能,在该试验过程中材料磨损的机制以粘着磨损和磨粒磨损为主。
|
| 关 键 词： | 摩擦磨损 磨损量 摩擦因数 磨损机制 |
| 文章编号： | 0254-0150（2007）10-090-3 |
| 修稿时间： | 2007-03-15 |
Friction and Wear Properties of Cu/FeS Composite |
| |
| Liang Na,Kang Bin,Chen Jingchao.Friction and Wear Properties of Cu/FeS Composite[J].Lubrication Engineering,2007,32(10):90-92,96. |
| |
| Authors: | Liang Na Kang Bin Chen Jingchao |
| |
| Affiliation: | 1. Key Laboratory of Advanced Materials of Precious-Nonferrous Metals, Education Ministry of China,and Key Laboratory of Advanced Materials of Yunnan Province, Kunming University of Science and Technology, Kunming Yunnan 650093, China; 2. Sichuan Metallurgical Information and Standard Institute, Chengdu Sichuan 610041, China |
| |
| Abstract: | Cu/FeS composite was prepared by in-situ reaction and processed by extrusion with 6.4 strain,its friction and wear properties was studied.The worn sample appearance was studied was observed by SEM,and the influence factors and wear mechanism were analyzed after experimentations.The results indicate that the wear properties are influenced by load,glide velocity and rigidity,and the main wear mechanism is adherence wear and abrasive wear. |
| |
| Keywords: | Cu/FeS |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
