|
|||||
|
|
| 冷弯薄壁卷边槽钢组合工字梁极限承载力计算的折减强度法 | |
| 引用本文： | 石宇,周绪红,聂少锋,苑小丽. 冷弯薄壁卷边槽钢组合工字梁极限承载力计算的折减强度法[J]. 工程力学, 2011, 0(9): 174-182 |
| 作者姓名： | 石宇 周绪红 聂少锋 苑小丽 |
| 作者单位： | 长安大学旧桥检测与加固技术交通行业重点实验室;兰州大学西部灾害与环境力学教育部重点实验室; |
| 基金项目： | 国家自然科学基金项目(50978128); 中央高校科研专项基金项目; 长安大学基础研究专项基金项目(CHD2009JC036) |
| 摘 要： | 为了研究冷弯薄壁卷边槽钢组合工字梁的受弯性能，对3种截面形式共计9根卷边槽钢组合工字梁进行了破坏性试验研究，并采用有限元方法对试件进行模拟分析，有限元计算结果与试验结果吻合良好，验证了该文有限元方法的有效性。然后对典型截面梁构件进行了大量的参数分析，研究结果表明：随着钢材强度提高、梁长度减小、腹板高厚比和翼缘宽厚比增加... |
| 关 键 词： | 冷弯薄壁型钢 卷边槽钢 组合工字梁 极限承载力 折减强度法 |
STRENTH-REDUCTION METHOD FOR LOAD-CARRYING CAPACITY OF COLD-FORMED STEEL COMPOSITE I-BEAM |
|
| SHI Yu,ZHOU Xu-hong,,NIE Shao-feng,YUAN Xiao-li. STRENTH-REDUCTION METHOD FOR LOAD-CARRYING CAPACITY OF COLD-FORMED STEEL COMPOSITE I-BEAM[J]. Engineering Mechanics, 2011, 0(9): 174-182 | |
| Authors: | SHI Yu ZHOU Xu-hong NIE Shao-feng YUAN Xiao-li |
| Affiliation: | SHI Yu1,ZHOU Xu-hong1,2,NIE Shao-feng1,YUAN Xiao-li2(1.Key Laboratory of Bridge Detection & Reinforcement Technology,Ministry of Communications,Chang'an University,Xi'an,Shaanxi 710061,China,2.Key Laboratory of Mechanics on Western Disaster and Environment,Lanzhou University,Lanzhou,Gansu 730000,China) |
| Abstract: | In order to investigate the bending behavior of cold-formed steel I-beams,a total of 9 cold-formed I-beams with three different sections were tested.And tests were simulated by finite element analysis.The well fitting between finite element analysis and test results proves the validity of the finite element method in this paper.Then a large number of parametric analyses were carried out through the finite element analysis on typical members and the following conclusions can be obtained: with the increase of... |
| Keywords: | cold-formed steel lipped channel composite I-beam ultimate load-carrying capacity strength-reduction method |
| 本文献已被 CNKI 等数据库收录！ | |