| 矩形截面内喷式阴极展成电解加工平面的工艺试验 |
| |
| 引用本文： | 康敏,赵建社,徐家文. 矩形截面内喷式阴极展成电解加工平面的工艺试验[J]. 电加工与模具, 2004, 0(5): 21-23 |
| |
| 作者姓名： | 康敏 赵建社 徐家文 |
| |
| 作者单位： | 1. 南京农业大学,江苏南京,210031
2. 南京航空航天大学,江苏南京,210016 |
| |
| 摘 要： | 采用矩形截面内喷式阴极进行展成电解加工平面的工艺试验，得到了阴极送进速度、工作电压、初始间隙与电解加工间隙和电解去除量之间的关系曲线，以及阴极送进速度和工作电压与加工表面粗糙度之间的关系曲线，并对试验结果进行了分析。
|
| 关 键 词： | 展成电解加工 工艺试验 表面粗糙度 阴极 平面 工作电压 关系曲线 试验结果 |
| 修稿时间： | 2004-05-25 |
Experimental study on electrochemical contour evolution machining by use of the tool-electrode with rectangle section |
| |
| Kang Min,et al.. Experimental study on electrochemical contour evolution machining by use of the tool-electrode with rectangle section[J]. Electromachining & Mould, 2004, 0(5): 21-23 |
| |
| Authors: | Kang Min et al. |
| |
| Abstract: | In this paper, the experimental investigations were carried out in order to evaluate the influence of feed rate of tool-electrode, working voltage and initial gap size on machining accuracy and surface roughness in the electrochemical contour evolution machining plane by use of the new type of tool-electrode with rectangle section, and the experimental results were analyzed. |
| |
| Keywords: | contour evolution Electrochemical Machining tool-electrode |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
