Structure and wear resistance of the composite layers produced by glow discharge nitriding and PLD method on AISI 316L austenitic stainless steel |
| |
| Affiliation: | 1. Faculty of Material Science and Engineering, Warsaw University of Technology, 02-507 Warsaw, Poland;2. Institute of Optoelectronic, Military University of Technology, 00-908 Warsaw, Poland;1. Energy & Environment Science and Technology, Idaho National Laboratory, 2525 Fremont Ave, Idaho Falls, ID 83402, USA;2. Center for Advanced Energy Studies, 995 University Blvd, Idaho Falls, ID 83401, USA;3. Centre for Materials Science and Nanotechnology (SMN), Department of Chemistry, University of Oslo, Sem Saelands vei 26, 0371 Oslo, Norway;4. Department of Chemical Engineering, Washington University in Saint Louis, One Brookings Dr, St. Louis, MO 63130, USA;5. Department of Mathematical Analysis, Ghent University, Galglaan 2, B-9000 Gent, Belgium;1. Laboratoire PRISME, Université d’Orléans, 8 rue Léonard de Vinci, 45072 Orléans Cedex 2, France;2. RENAULT SAS, 1 allée Cornuel, 91510 Lardy, France;1. Department of Mechanical Engineering, 2181 Martin Hall, Campus Dr., University of Maryland, College Park, MD 20742, USA;2. Sensors and Electron Devices Directorate, U.S. Army Research Laboratory, 2800 Powder Mill Rd., Adelphi, MD 20783, USA;1. Institute of Metallurgy and Materials Science, Polish Academy of Sciences, 30-059 Krakow, Poland;2. Laboratory of Engineering Materials, Aalto University, PL 14200, FIN-00076 Aalto, Finland;3. Institute of Physics ASCR, Na Slovance 2, 182 21 Praha 8, Czechia;4. Material Physics Laboratory, Lappeenranta University of Technology, Laitaatsillantie 3, 57170 Savonlinna, Finland;5. AGH University of Science and Technology, Academic Centre for Materials and Nanotechnology, Mickiewicza 30, 30-059 Krakow, Poland;6. Institut für Strukturphysik, Technische Universität Dresden, D-01062 Dresden, Germany |
| |
| Abstract: | The rapid technical development enhances the demands on constructional materials in terms of their resistance to frictional wear, resistance to corrosion and erosion, high hardness, high tensile and fatigue strength. These demands can be satisfied by e.g. applying various surface engineering techniques that permit to modify the microstructure, phase and chemical composition of the surface layers of the treated parts. A prospective line of the development of surface engineering is the production of composite layers by combining various surface engineering methods. The paper presents the results of examinations of the phase composition and frictional wear resistance of the layers produced by hybrid processes, i.e. such that combined glow discharge assisted nitriding performed at 450 °C and 550 °C with a pulsed laser deposition of boron nitride coatings (PLD method). It has been shown that the boron nitride coatings formed on nitrided AISI 316L steel increase its frictional wear resistance. |
| |
| Keywords: | |
| 本文献已被 ScienceDirect 等数据库收录！ |
|
