| 彩电内插座支架注射成型模设计 |
| |
| 引用本文： | 屈华昌,杨爱文,叶兵.彩电内插座支架注射成型模设计[J].模具工业,2002(1):43-45. |
| |
| 作者姓名： | 屈华昌 杨爱文 叶兵 |
| |
| 作者单位： | 1. 南京工程学院,江苏南京,210013
2. 苏州永儒塑胶有限公司,江苏苏州,215155 |
| |
| 摘 要： | 分析了彩电内插座支架塑件的结构特点 ,介绍了该塑件注射模的结构与工作过程 ,着重介绍了弯销、齿轮齿条、斜导杆及液压侧向分型与抽芯机构在该模具中的应用。
|
| 关 键 词： | 支架 注射模 侧向分型 抽芯 |
| 文章编号： | 1001-2168(2002)01-0043-03 |
| 修稿时间： | 2001年3月7日 |
Design of the Injection Mould for the bracket of the Inner Jack of the Color TV Set |
| |
| QU Hua_chang,YANG Ai_wen,YE Bing.Design of the Injection Mould for the bracket of the Inner Jack of the Color TV Set[J].Die & Mould Industry,2002(1):43-45. |
| |
| Authors: | QU Hua_chang YANG Ai_wen YE Bing |
| |
| Affiliation: | QU Hua_chang1,YANG Ai_wen1,YE Bing2 |
| |
| Abstract: | The structure characteristics of the plastic bracket of the inner jack of the color TV set were analyzed. The structure and working process of the injection mould for the part were introduced. The application of the dog_leg cam, gear and rack, guide angle pin, hydraulic side parting system and core_pulling system in the mould was stated in detail. |
| |
| Keywords: | bracket injection mould side parting core pulling |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
