| 不同电规准条件下硬质合金电火花加工性能的研究 |
| |
| 引用本文： | 胡玉景,张建华,任升峰,刘长霞.不同电规准条件下硬质合金电火花加工性能的研究[J].工具技术,2006,40(1):26-28. |
| |
| 作者姓名： | 胡玉景 张建华 任升峰 刘长霞 |
| |
| 作者单位： | 山东大学南校区机械工程学院博2003级,250061,济南市;山东大学 |
| |
| 摘 要： | 通过对硬质合金材料的电火花加工试验,研究了脉冲宽度、峰值电流等电参数对加工效率、电极损耗、加工表面粗糙度等加工性能的影响规律,并分析了其作用机理,提出通过合理配置电参数以改善硬质合金加工性能的工艺原则。
|
| 关 键 词： | 放电加工 硬质合金 脉冲宽度 峰值电流 |
| 收稿时间： | 2005-06 |
| 修稿时间： | 2005-06 |
Study on EDM Performance of Carbide Under Different Electricity Parameter |
| |
| Hu Yujing, Zhang Jianhua, Ren Shengfeng ,et al.Study on EDM Performance of Carbide Under Different Electricity Parameter[J].Tool Engineering(The Magazine for Cutting & Measuring Engineering),2006,40(1):26-28. |
| |
| Authors: | Hu Yujing Zhang Jianhua Ren Shengfeng |
| |
| Affiliation: | Hu Yujing Zhang Jianhua Ren Shengfeng et al |
| |
| Abstract: | Based on the experiment for EDM of carbide material, the influences of electricity parameters, such as pulse width and peak value of current, on the machining performances, including process efficiency, electrode wear and machined surface roughness, are. researched, and the effecting mechanism is analyzed. The process principle of selecting electricity parameters in reason to improve the machining performance in EDM of carbide is presented. |
| |
| Keywords: | EDM tungsten carbide pulse width peak value of current |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
