| 车灯检具设计 |
| |
| 引用本文： | 刘磊,朱熠旻,陆淳豪.车灯检具设计[J].模具技术,2006(3):44-46. |
| |
| 作者姓名： | 刘磊 朱熠旻 陆淳豪 |
| |
| 作者单位： | 1. 上海理工大学,仪器仪表工程学院,上海,200093
2. 上海小糸车灯有限公司,上海,201821 |
| |
| 摘 要： | 车灯检具作为验证模具的加工精度以及控制灯具与车身匹配情况的快速工具，已成为主机厂与车灯供应商的首选工具，通过介绍车灯检具的结构，列举了捡具主体、副检具设计的重要控制点，特别是详细列举了灯具安装部构造的设计，从而实现了通过再现灯具的装车状态来模拟实物产品与车身匹配的目的。
|
| 关 键 词： | 车灯 设计 检具 |
| 文章编号： | 1001-4934（2006）03-0044-03 |
| 收稿时间： | 2006-03-07 |
| 修稿时间： | 2006年3月7日 |
Design of Automobile Lamp Gauge |
| |
| LIU Lie,ZHU Yi-ming,LU Chun-hao.Design of Automobile Lamp Gauge[J].Die and Mould Technology,2006(3):44-46. |
| |
| Authors: | LIU Lie ZHU Yi-ming LU Chun-hao |
| |
| Abstract: | Automobile lamp gauge, as a rapid tool to confirm the machining precision as well as mating situation of automobile body, becomes a first choice for motor companies and lamp suppliers. Through the structure introduction of lamp gauge, the key design points of main body of gauge and sub-gauge are listed, especially the design of mounting position of lamp is elaborated. Therefore, it is fulfilled to simulate the mating of actual product by reappearing assembly state of lamp and vehicle. |
| |
| Keywords: | automobile lamp design gauge |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
