| 宽带钢拉弯矫直工艺参数关系模型研究 |
| |
| 引用本文： | 张清东,刘天浩,王文广,朱简如.宽带钢拉弯矫直工艺参数关系模型研究[J].钢铁,2007,42(2):44-46. |
| |
| 作者姓名： | 张清东 刘天浩 王文广 朱简如 |
| |
| 作者单位： | 1. 北京科技大学机械学院,北京,100083
2. 宝山钢铁股份有限公司冷轧厂,上海,200941 |
| |
| 摘 要： | 运用MARC有限元软件对宽带钢拉伸弯曲矫直变形过程进行大量工况的数值仿真计算,然后应用逐步回归法对数值仿真计算结果数据进行拟合,获得带钢在拉伸弯曲矫直变形中伸长率和张力与各个相关设备及工艺参数的关系数学模型.将在宝钢酸轧机组的拉矫机上实测记录的有关数据代入所建模型,计算所得的伸长率和张力值与生产实际数据吻合良好.所建模型已用于对此拉矫机工艺参数设定值的优化调整.
|
| 关 键 词： | 拉伸弯曲矫直机 伸长率 张力 数值仿真 逐步回归分析 |
| 文章编号： | 0449-749X（2007）02-0044-03 |
| 修稿时间： | 2006-03-06 |
Technical Parameter Relation Models of Tension Levelling of Wide Steel Strip |
| |
| ZHANG Qing-dong,LIU Tian-hao,WANG Wen-guang,ZHU Jian-ru.Technical Parameter Relation Models of Tension Levelling of Wide Steel Strip[J].Iron & Steel,2007,42(2):44-46. |
| |
| Authors: | ZHANG Qing-dong LIU Tian-hao WANG Wen-guang ZHU Jian-ru |
| |
| Affiliation: | 1. Mechanical Engineering School, University of Science and Technology Beijing, Beijing 100083, China; 2. Cold Rolling Dept. , Baoshan Iron and Steel Co. , Ltd. , Shanghai 200941, China |
| |
| Abstract: | The deformation of wide steel strip during tension leveling was simulated by MARC software based on large numbers of operation date. The mathematic model to predict stress and elongation under different conditions of tension leveling was established by means of stepwise regression. The data calculated agreed with actual data and this model is used to optimize technical parameters of tension leveller. |
| |
| Keywords: | tension leveller elongation stress numerical simulation stepwise regression |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
