首页 | 本学科首页   官方微博 | 高级检索  
     

淀粉接枝丙烯酸聚合型絮凝剂的合成及絮凝性能研究
引用本文:徐秀梅.淀粉接枝丙烯酸聚合型絮凝剂的合成及絮凝性能研究[J].辽宁化工,2009,38(9):601-604.
作者姓名:徐秀梅
作者单位:黑龙江科技学院资源与环境工程学院,黑龙江,哈尔滨,150027
摘    要:以可溶性淀粉为主要原料,以丙烯酸为接枝单体,硝酸铈铵和过硫酸钾为复合引发剂,采用溶液聚合的方法对糊化处理后的淀粉进行接枝聚合,合成出环保型淀粉衍生物水处理絮凝剂。通过对接枝聚合反应温度、反应时间、引发剂用量以及丙烯酸单体用量等因素对接枝率影响的研究,确定较佳的接枝产物合成条件:淀粉10g,单体丙烯酸用量10mL,硝酸铈铵和过硫酸钾(摩尔比1:1)复合引发体系用量2mmol,接枝反应温度50℃,接枝反应时间3h,接枝率达到43.2%。利用选煤后的废水对其产品絮凝性能进行实验研究,确定较佳的废水絮凝处理条件。

关 键 词:淀粉  接枝共聚  丙烯酸  絮凝处理

Synthesis of Flocculant by Graft Polymerization of Starch and Acrylic Acid and Research of Its Flocculability
XV Xiu-mei.Synthesis of Flocculant by Graft Polymerization of Starch and Acrylic Acid and Research of Its Flocculability[J].Liaoning Chemical Industry,2009,38(9):601-604.
Authors:XV Xiu-mei
Affiliation:XV Xiu-mei (Heilongjiang Institute of Science and Technology, Haerbin 150027, China)
Abstract:Using starch as main raw material, acrylic acid as the graft monomer , ceric ammonium nitrate and potassium persulfate as the compound initiator , environmental friendly flocculant for wastewater treatment was synthesized by graft polymerization of gelatinized starch with solution polymerization method. Effects of reaction temperature, reaction time,initiator dosage and acrylic acid dosage etc. on grafting ratio were studied to determine synthesis conditions. The results show that when starch is 10 g, monomer acrylic acid is 10ml, ratio of ceric ammonium nitrate and potassium persulfate is 1: 1, compound initiator is 2 mmol, the grafting reaction temperature is 50℃ ,grafting reaction time is 3 h, grafting ratio can reach 43.2%. Using slime - water as sample,flocculation performance of the flocculant was studied ,the best treatment conditions of wastewater flocculation was deter- mined.
Keywords:Starch  Graft polymerization  Acrylic acid  Flocculantion
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号