工艺参数对TA0半球件冷拉深成形的影响规律

以TA0薄壁半球形零件冷拉深成形为研究对象,采用数值模拟与试验研究相结合的手段,在研究该拉伸成形过程中零件的应变及壁厚分布规律及组织演变规律的基础上,对破裂、起皱缺陷位置进行了预测。同时,采用正交试验分析方法,研究了单位压边力、摩擦系数、凹模圆角半径和凸凹模间隙等工艺参数,对该拉深成形过程的影响规律。结果表明,单位压边力、摩擦系数、凹模圆角半径对拉深过程均有显著影响,其中贡献率分别为凹模圆角半径41.04%,摩擦系数30.27%,压边力24.68%。

Influence of processing parameters on the deep drawing of TA0 titanium hemispherical part

In this paper,the deep drawing of TA0 titanium hemispherical part is studied by numerical simulation and experiment method.After an investigation on the rules of this deep drawing process,a virtual orthogonal experimental design is adopted to determine the significance of processing parameters,die radius,blank holder force and friction coefficient,on the forming process.The results show that the die radius,blank holder force and friction coefficient are all significant on the forming process.