Behavior of Cyclically Loaded Squat Reinforced Concrete Bridge Columns Upgraded with Advanced Composite-Material Jackets |
| |
| Authors: | Medhat A Haroun Hussein M Elsanadedy |
| |
| Affiliation: | 1Dean and AGIP Professor, School of Sciences and Engineering, The American Univ. in Cairo, Egypt; and Professor Emeritus, Univ. of California, Irvine.
2Assistant Professor, Dept. of Civil Engineering, Helwan Univ., Cairo, Egypt; formerly, Graduate Student, Dept. of Civil and Environmental Engineering, Univ. of California, Irvine.
|
| |
| Abstract: | This paper summarizes comprehensive experimental studies on scaled models of squat bridge columns repaired and retrofitted with advanced composite-material jackets. In the experimental program, a total of 14 half-scale squat circular and rectangular reinforced concrete columns were tested under fully reversed cyclic shear in a double bending configuration. In order to provide a basis for comparison, a total of three as-built columns were tested. Another 10 column samples were tested after being retrofitted with different composite jacket systems. One circular as-built column was repaired after failure. The repair process involved both crack injection as well as addition of carbon/epoxy composite jacket. The repaired column was then retested and evaluated. Experimental results showed that all as-built columns developed an unstable behavior and failed in brittle shear mode. The common failure mode for all retrofitted samples was due to flexure with significant improvement in the column ductility. The repaired column demonstrated ductility enhancement over the as-built sample. |
| |
| Keywords: | Bridges concrete Composite materials Concrete columns Concrete reinforced Cyclic loads |
|
|
