| 纤维增强胎面矿山型载重子午线轮胎的设计 |
| |
| 引用本文： | 高升日,刘玉成,赵鹏飞,张勇,王成德,李勇.纤维增强胎面矿山型载重子午线轮胎的设计[J].轮胎工业,2013,33(7):396-399. |
| |
| 作者姓名： | 高升日 刘玉成 赵鹏飞 张勇 王成德 李勇 |
| |
| 作者单位： | 山东恒宇科技集团山东恒宇橡胶有限公司;清华大学汽车工程系 |
| |
| 摘 要： | 通过在12.00R20矿山型全钢载重子午线轮胎的胎面表层植入1层纤维增强层和胎面胶片,设计制造出一种纤维增强胎面矿山型载重子午线轮胎。纤维增强层采用锦纶6帘线覆胶设计,帘线规格1400dtex/2,帘线与轮胎行驶方向呈45°排列。与普通矿山型载重轮胎相比,纤维增强胎面矿山型载重轮胎具有更高的抗刺扎和抗切割性能;纤维增强层有助于减小胎面生热,延长轮胎的行驶寿命。
|
| 关 键 词： | 矿山型载重子午线轮胎 胎面 纤维增强层 |
Design of Fiber Reinforced Tread for Mining Truck Radial Tire |
| |
| GAO Sheng-ri,LIU Yu-cheng,ZHAO Peng-fei,ZHANG Yong,WANG Cheng-de and LI Yong.Design of Fiber Reinforced Tread for Mining Truck Radial Tire[J].Tire Industry,2013,33(7):396-399. |
| |
| Authors: | GAO Sheng-ri LIU Yu-cheng ZHAO Peng-fei ZHANG Yong WANG Cheng-de and LI Yong |
| |
| Affiliation: | 1.Shandong Hengyu Rubber Co.,Ltd,Shandong Hengyu Technology Group,Dongying 257335,China;2.Tsinghua University,Beijing 100084,China) |
| |
| Abstract: | The fiber reinforced tread of the 12.00R20 mining truck radial tire was designed and produced by implanting fiber reinforced ply into the tread surface.The fiber reinforced ply was prepared by using 1400dtex/2 dipped nylon 6 cords,and the cords were aligned at an angle of 45 degree from the direction of travel.Compared with common mining truck tires,the mining truck radial tire with fiber reinforced tread possessed better puncture resistance and cutting resistance.The fiber reinforced ply could decrease the heat build up of the tread and prolong the tire service life. |
| |
| Keywords: | |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《轮胎工业》浏览原始摘要信息 |
|
点击此处可从《轮胎工业》下载全文 |
|
