首页 | 本学科首页   官方微博 | 高级检索  
     

钨对淬火回火高铬铸铁冲击性能和耐磨性的影响
引用本文:王新华,方晓辉,邢斌,李志明,孙玉福.钨对淬火回火高铬铸铁冲击性能和耐磨性的影响[J].金属热处理,2012,37(6):94-96.
作者姓名:王新华  方晓辉  邢斌  李志明  孙玉福
作者单位:1. 郑州机械研究所,河南郑州,450001
2. 郑州大学材料科学与工程学院,河南郑州,450002
摘    要:通过冲击试验和磨损试验,研究了钨含量对淬火回火高铬铸铁性能的影响。结果表明,热处理对钨元素的分布影响不大,钨在基体和碳化物中均匀分布。随钨含量增加,淬火回火高铬铸铁硬度增加,冲击韧度和耐磨性先升高后降低。高铬钨铸铁硬度为62~65 HRC,冲击韧度为6~8 J/cm2,一定量钨的加入能显著提高高铬铸铁的耐磨性。

关 键 词:  高铬铸铁  力学性能  耐磨性

Effects of tungsten on mechanical properties and wear resistance of as-quenched-tempered high chromium cast iron
WANG Xinhua,FANG Xiaohui,XING Bin,LI Zhiming,SUN Yufu.Effects of tungsten on mechanical properties and wear resistance of as-quenched-tempered high chromium cast iron[J].Heat Treatment of Metals,2012,37(6):94-96.
Authors:WANG Xinhua  FANG Xiaohui  XING Bin  LI Zhiming  SUN Yufu
Affiliation:1.Zhengzhou Research Institute of Mechanical Engineering,Zhengzhou He’nan 450001,China; 2.School of Materials Science and Engineering,Zhengzhou University,Zhengzhou He’nan 450002,China)
Abstract:Effect of tungsten on properties of as-quenched-tempered high chromium cast iron were studied by mechanical properties and wear resistance testing.The results show that heat treatment hardly has any effect on the distribution of tungsten.The distribution of W is uniform in matrix and carbides of high chromium cast iron.With W content increasing,the hardness increases,the impact toughness and the wear resistance increases first and then decreases.The hardness and impact toughness of the high chromium tungsten cast iron are 62-65 HRC and 6-8 J/cm2.The wear resistance of high chromium cast iron increases obviously with tungsten addition.
Keywords:tungsten  high chromium cast iron  mechanical properties  wear resistance
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号