| 40Cr冷镦钢盘条锭型偏析原因分析 |
| |
| 引用本文： | 马立国,郭大勇,宁东,罗建华,韩立涛,车安.40Cr冷镦钢盘条锭型偏析原因分析[J].鞍钢技术,2015(2):59-62. |
| |
| 作者姓名： | 马立国 郭大勇 宁东 罗建华 韩立涛 车安 |
| |
| 作者单位： | 鞍钢集团钢铁研究院,辽宁鞍山,114009;鞍钢股份有限公司炼钢总厂,辽宁鞍山,114021;鞍钢股份有限公司线材厂,辽宁鞍山,114021 |
| |
| 摘 要： | 通过成分线扫描、硬度测量、金相组织检验等方法,对鞍钢生产的40Cr冷镦钢盘条产生的锭型偏析缺陷成因进行了分析。线扫描结果显示,盘条Mn、Si、P、S、Cr元素分布均匀,C元素分布不均;盘条锭型区域硬度值最高,珠光体较多,C元素富集。试验结果表明,盘条C元素分布不均是导致锭型偏析的主要原因。
|
| 关 键 词： | 冷镦钢 40Cr盘条 锭型偏析 |
Analysis on Segregation in Ingot for Wire Rods of 40Cr Cold Forged Steel |
| |
| Ma Liguo,Guo Dayong,Ning Dong,Luo Jianhua,Han Litao,Che An.Analysis on Segregation in Ingot for Wire Rods of 40Cr Cold Forged Steel[J].Aisc Techniques,2015(2):59-62. |
| |
| Authors: | Ma Liguo Guo Dayong Ning Dong Luo Jianhua Han Litao Che An |
| |
| Abstract: | By means of linear scanning for compositions, hardness measurement, metallograph-ic examination, the causes leading to the segregation of an ingot for wire rods of 40Cr cold forged steel produced by Ansteel are analyzed. The results by linear scanning show that the elements such as Mn, Si, P, S and Cr are in homogeneous distribution in wire rods, but the element of C is not. The hardness value of the ingot for steel wire rods is highest with more pearlite and enriched C. The experimental results show that the segregation in ingot for wire rods is mainly caused by the uneven distribution of C. |
| |
| Keywords: | cold forged steel 40Cr wire rod segregation in ingot |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
