|
|||||
|
|
| 基于NX平台参数化协同设计技术 | |
| 引用本文： | 胡炜,李长春,芮延年.基于NX平台参数化协同设计技术[J].机床与液压,2011,39(13). |
| 作者姓名： | 胡炜 李长春 芮延年 |
| 作者单位： | 1. 苏州工业职业技术学院,江苏苏州215104;苏州大学机电工程学院,江苏苏州215007 2. 苏州工业职业技术学院,江苏苏州,215104 3. 苏州大学机电工程学院,江苏苏州,215007 |
| 基金项目： | 教育部博士点基金资助项目 |
| 摘 要： | 分析协同设计技术及参数化技术,提出用NX软件在异地通过网络进行产品协同设计的方法.根据产品中零件的关联关系,分析零件设计的顺序以及零件之间的参数关联,并根据产品的树状结构和网状关系与网络的分布结构类似的特点,在NX平台下,采用“Top-down”的装配设计方法,利用WAVE技术驱动参数,根据网络分布情况,合理安排任务,使整个设计网发挥最大的效率,并给出设计实例. |
| 关 键 词： | 网络 参数化 协同设计 NX平台 |
Parametric Cooperation Design Technology Based on NX Platform |
|
| HU Wei,LI Changchun,RUI Yannian.Parametric Cooperation Design Technology Based on NX Platform[J].Machine Tool & Hydraulics,2011,39(13). | |
| Authors: | HU Wei LI Changchun RUI Yannian |
| Affiliation: | HU Wei1,2,LI Changchun1,RUI Yannian2 (1.Suzhou Institute of Industrial Technology,Suzhou Jiangsu 215104,China,2.Soochow University,Suzhou Jiangsu 215007,China) |
| Abstract: | Computer supposed cooperation design(CSCD)technology and parametric technology were analyzed.The approach was proposed that NX software was use to design product collaboratively through network.Sequence of part design was analyzed,as well as parameter correlation between parts.According to the character that product tree structure and network relations were similar to network distribution structure,in the NX platform,usingTop-downassembly design,WAVE technology was used to drive parameters.According to netw... |
| Keywords: | Network Parameterization Computer supposed cooperation design NX platform |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |