| 基于棉纺设备的不锈钢短纤维/棉混纺纱工艺 |
| |
| 引用本文： | 高山,郭洪为,陈国华.基于棉纺设备的不锈钢短纤维/棉混纺纱工艺[J].纺织学报,2006,27(5):87-89. |
| |
| 作者姓名： | 高山 郭洪为 陈国华 |
| |
| 作者单位： | 1.青岛出入境检验检疫局 山东青岛266002;2.青岛大学纺织服装学院 山东青岛266071 |
| |
| 摘 要： | 根据金属纤维的性能,采用与不锈钢短纤维伸长相对差异较小的棉纤维混纺,使用棉纺普梳设备,对纺纱过程中的工艺参数进行了调整。结果表明,在棉纺设备上纺金属纤维/棉混纺纱是可行的。虽然金属纤维强力较高,但因为其伸长太小,所以制成率较低,只有70%,金属纤维损伤也较严重。
|
| 关 键 词： | 不锈钢短纤维 棉纤维 纺纱工艺 制成率 |
| 文章编号： | 0253-9721（2006）05-0087-03 |
| 收稿时间： | 2005-07-11 |
| 修稿时间： | 2005-12-06 |
Processing stainless steel staple fiber/cotton yarn on cotton spinning system |
| |
| GAO Shan,GUO Hong-wei,CHEN Guo-hua.Processing stainless steel staple fiber/cotton yarn on cotton spinning system[J].Journal of Textile Research,2006,27(5):87-89. |
| |
| Authors: | GAO Shan GUO Hong-wei CHEN Guo-hua |
| |
| Affiliation: | 1.Qingdao Entry-Exit Inspection and Quarantine Bureau;Qingdao;Shandong 266002;China;2.College of Textile and Clothing;Qingdao University;Qingdao;Shandong 266071;China |
| |
| Abstract: | Based on the properties of the stainless steel staple fiber, mixed it with cotton fiber since their elongations are similar. The cotton spinning system was used with processing process adjusted to adapt to the particularity of the fibers. The experiment results indicated that it is feasible to spin the stainless steel staple fiber/cotton yarn on a cotton spinning system. However, being high tenacity but low elongation, the stainless steel staple fibers are damaged seriously and have as low as a 70 % finished product rate. |
| |
| Keywords: | stainless steel staple fiber cotton fiber spinning process finished product rate |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《纺织学报》浏览原始摘要信息 |
|
点击此处可从《纺织学报》下载全文 |
