Sequential Coalescence Enabled Two‐Step Microreactions in Triple‐Core Double‐Emulsion Droplets Triggered by an Electric Field

Advances in microfluidic emulsification have enabled the generation of exquisite multiple‐core droplets, which are promising structures to accommodate microreactions. An essential requirement for conducting reactions is the sequential coalescence of the multiple cores encapsulated within these droplets, therefore, mixing the reagents together in a controlled sequence. Here, a microfluidic approach is reported for the conduction of two‐step microreactions by electrically fusing three cores inside double‐emulsion droplets. Using a microcapillary glass device, monodisperse water‐in‐oil‐in‐water droplets are fabricated with three compartmented reagents encapsulated inside. An AC electric field is then applied through a polydimethylsiloxane chip to trigger the sequential mixing of the reagents, where the precise sequence is guaranteed by the discrepancy of the volume or conductivity of the inner cores. A two‐step reaction in each droplet is ensured by two times of core coalescence, which totally takes 20–40 s depending on varying conditions. The optimal parameters of the AC signal for the sequential fusion of the inner droplets are identified. Moreover, the capability of this technique is demonstrated by conducting an enzyme‐catalyzed reaction used for glucose detection with the double‐emulsion droplets. This technique should benefit a wide range of applications that require multistep reactions in micrometer scale.