| 纸包装油墨中增塑剂向食品模拟物Tenax的迁移 |
| |
| 引用本文： | 高松,王志伟,胡长鹰.纸包装油墨中增塑剂向食品模拟物Tenax的迁移[J].高分子材料科学与工程,2012(10):30-33. |
| |
| 作者姓名： | 高松 王志伟 胡长鹰 |
| |
| 作者单位： | 江南大学机械工程学院;广东省普通高校产品包装与物流重点实验室;暨南大学包装工程研究所;暨南大学食品科学与工程系 |
| |
| 基金项目： | 国家自然科学基金资助项目(21077045,21277061);国家科技支撑计划项目(2009BADB9B04-01);中央高校基本科研业务费专项资金资助(21611360);中央高校基本科研业务费专项资金资助(21611460);暨南大学创新基金资助 |
| |
| 摘 要： | 通过纸张表印油墨的实验室印制方法,模拟真实纸包装油墨中四种增塑剂向食品模拟物Tenax的迁移,使用气相色谱法检测不同温度(50℃、70℃和100℃)、纸张克重(240g/m2和400g/m2)和增塑剂初始含量下的迁移量。结果表明,纸包装油墨中增塑剂的迁移行为由其扩散系数和分配系数决定,温度和纸张克重对增塑剂迁移行为影响较大,实际中要避免增塑剂的迁移对人体造成的危害。
|
| 关 键 词： | 油墨 增塑剂 纸包装 迁移 Tenax |
Migration of Plasticizers from Paper Packaging Inks to Tenax |
| |
| Song Gao,Zhiwei Wang,Changying Hu.Migration of Plasticizers from Paper Packaging Inks to Tenax[J].Polymer Materials Science & Engineering,2012(10):30-33. |
| |
| Authors: | Song Gao Zhiwei Wang Changying Hu |
| |
| Affiliation: | 3,4(1.Department of Packaging Engineering,Jiangnan University,Wuxi 214122,China;2.Institute of Packaging Engineering,Jinan University,Zhuhai 519070,China;3.Department of Food Science and Engineering,Jinan University,Guangzhou 510632,China;4.Key Laboratory of Product Packaging and Logistics for Guangdong Higher Education Institutes,Jinan University,Zhuhai 519070,China) |
| |
| Abstract: | A series of food safety incidents have caused widespread concern over the safety of plasticizer.Three phthalates(dibutyl phthalate(DBP),bis(2-ethylhexyl) phthalate(DEHP),di-n-octyl phthalate(DOP)) and a new environmental plasticizer acetyl tributyl citrate(ATBC) are commonly used in inks.Gas chromatography (GC) was used to measure the migration of four plasticizers from inks in lad-made printing paper to food stimulant(Tenax) at different temperature(50 ℃,70 ℃ and 100 ℃),different paper weight(240g/m2 and 400 g/m2) and the different initial content of plasticizers.The results show that the lab-made printing paper can stimulate the real paper packaging with inks and the migration of plasticizers from inks depends on the diffusion and partition coefficients.The migration behaviour is significantly affected by the temperature and paper weight. Maximum migration increases with increasing temperature and decreasing paper weight. |
| |
| Keywords: | printing inks plasticizers paper packaging migration Tenax |
| 本文献已被 CNKI 等数据库收录！ |
|
