| 左右支架注射模设计与制造 |
| |
| 引用本文： | 张晓陆.左右支架注射模设计与制造[J].模具工业,2007,33(8):69-73. |
| |
| 作者姓名： | 张晓陆 |
| |
| 作者单位： | 江苏春兰机械制造有限公司,江苏,泰州,225300 |
| |
| 摘 要： | 以左右支架模具为例详细阐述了两板式侧浇口注射模的结构设计要点与工作过程,在结合多年实践经验的基础上通过采用CAE软件进行流动分析,得出了一个合理而实用的流道系统方案,使模具的缺陷大大降低,进而提高了塑件的内在质量和改善塑件的工作性能。
|
| 关 键 词： | 注射模 侧浇口 分型面 |
| 文章编号： | 1001-2168（2007）08-0069-05 |
| 修稿时间： | 2007-02-09 |
Design and manufacture of injection mould for left and right bracket |
| |
| ZHANG Xiao-lu.Design and manufacture of injection mould for left and right bracket[J].Die & Mould Industry,2007,33(8):69-73. |
| |
| Authors: | ZHANG Xiao-lu |
| |
| Affiliation: | Jiangsu Chunlan Machine Manufacturing Co., Ltd, Taizhou, Jiangsu 22.5300, China |
| |
| Abstract: | The key points in the structural design of a two-plate type injection mould with side runner for a left and right bracket,and the working process were described in detail.A feasible runner system was obtained based on the CAE flow analysis and practical experiences.With the application,the mould defects were diminished,and the quality and performance of the plastic bracket were improved. |
| |
| Keywords: | injection mould side runner parting line |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
