| 考虑轮齿制造误差的螺旋锥齿轮加载接触分析 |
| |
| 引用本文： | 王延忠,周云飞,周济,蔡春源. 考虑轮齿制造误差的螺旋锥齿轮加载接触分析[J]. 机械科学与技术, 2002, 21(2): 224-227 |
| |
| 作者姓名： | 王延忠 周云飞 周济 蔡春源 |
| |
| 作者单位： | 华中科技大学,武汉,430074;东北大学,沈阳,110006 |
| |
| 基金项目： | 国家自然科学基金资助项目 (5 9775 0 87 |
| |
| 摘 要： | 从可靠性理论出发 ,对轮齿误差进行分析 ,在此基础上 ,用空间共轭曲面啮合理论 ,确定出螺旋锥齿轮齿面点矢函数 ,建立螺旋锥齿轮考虑误差的轮齿加载接触分析方法 ,在加载条件下对齿轮副的真实接触区、接触点迹、运动误差、某一瞬时同时啮合的对数、齿间载荷分配问题等进行了分析
|
| 关 键 词： | 螺旋锥齿轮 误差 轮齿加载接触分析 |
| 文章编号： | 1003-8728(2002)02-0224-04 |
| 修稿时间： | 2001-03-30 |
Load Contact Analysis of Bevel Gear Tooth Based on Tooth Manufacture Error |
| |
| WANG Yan zhong ,ZHOU Yun fei ,ZHOU Ji ,CAI Chun yuan. Load Contact Analysis of Bevel Gear Tooth Based on Tooth Manufacture Error[J]. Mechanical Science and Technology for Aerospace Engineering, 2002, 21(2): 224-227 |
| |
| Authors: | WANG Yan zhong ZHOU Yun fei ZHOU Ji CAI Chun yuan |
| |
| Affiliation: | WANG Yan zhong 1,ZHOU Yun fei 1,ZHOU Ji 1,CAI Chun yuan 2 |
| |
| Abstract: | Tooth error is analyzed by the reliability theory. On this basis, the vector of bevel gear surface point is defined by the conjugation theory of space curve. The method for load tooth contact analysis (LTCA) is generated based on error. The calculation procedures are proposed for the values of the real size of tooth mesh contact area, position of contact points, dynamic error curve, instantaneous contemporary mesh teeth and load distribution. |
| |
| Keywords: | Helical bevel gear Error LTCA |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
