Steam fingering at the edge of a steam chamber in a heavy oil reservoir

The steam‐assisted gravity drainage (SAGD) process is one of the key in situ recovery processes being used today to recover heavy oil and bitumen. In this process, steam injected through a horizontal well, flows convectively towards the outer edges of a depletion chamber. At the edges of the depletion chamber, the steam releases its latent heat to the cool oil sand and raises its temperature. The heated oil is mobile and flows under the action of gravity to a horizontal production well located several metres below the injection well. It remains unclear what is the exact mechanism of chamber growth. Some have suggested that in addition to heat conduction, it is by convective steam flow in the form of pointed fingers at the edges of the chamber which penetrate the oil sand. In theory published by Butler Butler, J. Can. Petroleum Technol. 1987;26(3):70–75], it was determined that the fingers can be as long as 6 m for Athabasca bitumen reservoirs. In this research, a new theory is derived and provides predictions of the rise rate which compare better to estimates derived from field thermocouple data and physical model experimental observations than values obtained from Butler's theory. The results suggest that in the absence of mobile water, heat conduction rather than steam fingers at the chamber edge is the dominant heat transfer mechanism.