单机可逆轧机打滑影响因素分析及防治措施

在冷轧可逆轧机轧制过程中，随着轧制总压下率的增加，由于受轧辊表面粗糙度、辊径、道次压下量、轧制压力以及前后张力差值的影响，易出现打滑现象，造成带钢表面出现热划伤、擦痕等缺陷。通过对影响打滑各因素的分析，制定了增大第1道次前张力、提高轧辊表面初始粗糙度、减小末道次压下量、优化轧制规程等措施，消除了打滑现象。

Influence Factor Analysis and Prevention Measures of Single Reversing Mill Slipping

In reversible rolling course, because of the influences of roller＇ s saurface roughness, roller diameter, reduction in pass, draught pressure and tension differential, slipping phenomenon appeared easily and caused heat-scratches and scrapes created on the steel scrip＇ s surface. Factors influenced slipping were analyzed and some prevention measures were constituted, such as augmenting the front tension in the first pass, increasing roller＇ s surface roughness, reducing the reduction in the last pass and optimizing rolling rules. Then the slipping phenomenon was eliminated.