| 精丙烯塔常规流程和热泵流程比较 |
| |
| 引用本文： | 李春晓.精丙烯塔常规流程和热泵流程比较[J].炼油技术与工程,2010,40(7). |
| |
| 作者姓名： | 李春晓 |
| |
| 作者单位： | 中国石化集团洛阳石油化工工程公司 |
| |
| 摘 要： | 精丙烯塔的丙烯和丙烷沸点接近,所需的回流比大,可采用的流程有热泵流程和常规流程。由于塔底温度较低,常规流程中对热源温位要求不高,炼油厂其他装置富产的95℃的低温热水即可满足要求。针对精丙烯塔系统,从采用低温热水作热源的常规流程和热泵流程的工艺流程和主要操作参数出发,计算并汇总了两种流程的主要消耗和操作费用,对比了主要设备的投资,并对能耗进行了计算和分析,认为常规流程在操作费用方面有较大优势,每年可节省操作费用约1900×10~4 RMB$,具有较好的经济性。
|
| 关 键 词： | 精丙烯塔 常规流程 热泵流程 操作费用 投资 能耗 |
Comparative study on conventional process and heat pump process for propylene rectification tower |
| |
| Li Chunxiao.Comparative study on conventional process and heat pump process for propylene rectification tower[J].Petroleum Refinery Engineering,2010,40(7). |
| |
| Authors: | Li Chunxiao |
| |
| Affiliation: | Li Chunxiao SINOPEC Luoyang Petrochemical Engineering Corporation(Luoyang 471003; Henan; China); |
| |
| Abstract: | The boiling points of propylene and propane in propylene rectification tower were so close that the large reflux ratio was required.The available processes were the conventional flow and heat pump flow. Due to the low tower bottom temperature in conventional flow,the temperature of the heating medium need not be very high,and the refinery s 95℃hot water from other process units can meet the requirements.The conventional flow and heat pump flow for propylene rectification tower were comparatively studied in... |
| |
| Keywords: | fine propylene rectification tower conventional flow heat pump flow operation cost investment energy consumption |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
