| 高速整体硬质合金铣刀的变形与应力分析 |
| |
| 引用本文： | 张松,艾兴,李剑峰,刘继刚.高速整体硬质合金铣刀的变形与应力分析[J].中国机械工程,2005,16(18):1681-1684. |
| |
| 作者姓名： | 张松 艾兴 李剑峰 刘继刚 |
| |
| 作者单位： | 山东大学,济南,250061 |
| |
| 基金项目： | 国家自然科学基金资助重点项目(50435020)，山东省自然科学基金资助项目(Y2003F09) |
| |
| 摘 要： | 利用有限元软件Ansys8.0分析离心力和切削力对小直径整体硬质合金铣刀变形和应力分布的影响。研究表明,切削力是影响小直径整体硬质合金铣刀变形大小和应力水平高低的决定性因素,优化切削用量各参数与切削力间的关系,可以在保证铣刀不发生明显弯曲变形和折断的前提下,提高金属去除率和切削效率。
|
| 关 键 词： | 高速加工 整体硬质合金铣刀 变形 应力分布 |
| 文章编号： | 1004-132X（2005）18-1681-04 |
| 收稿时间： | 2004-11-02 |
| 修稿时间： | 2004-11-02 |
Deformation and Stress Distribution of Solid Cemented Carbide Milling Cutter for High-speed Machining |
| |
| Zhang Song,Ai Xing,Li Jianfeng,Liu Jigang.Deformation and Stress Distribution of Solid Cemented Carbide Milling Cutter for High-speed Machining[J].China Mechanical Engineering,2005,16(18):1681-1684. |
| |
| Authors: | Zhang Song Ai Xing Li Jianfeng Liu Jigang |
| |
| Abstract: | The effects of the centrifugal forces and the cutting forces on deformations and stress distributions of the milling cutters were analyzed by means of commercial finite element software Ansys8.0.Research results indicate that the cutting forces are the decision factors affecting the deformations and stress distributions of small-diameter solid cemented carbide milling cutters.Optimization of relationship between the cutting parameters and the cutting forces was benefit to improve metal removal rate and machining efficiency under the premise that the large deformations or the break of the small-diameter solid cemented carbide milling cutters could not be permitted to occur. |
| |
| Keywords: | high-speed machining solid cemented carbide milling cutter deformation stress distribution |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
