| 基于图像的轮廓度测量与评定 |
| |
| 引用本文： | 王仲,操晶晶,张立昆,张进.基于图像的轮廓度测量与评定[J].光学精密工程,2009,17(2). |
| |
| 作者姓名： | 王仲 操晶晶 张立昆 张进 |
| |
| 作者单位： | 天津大学,精密测试技术及仪器国家重点实验室,天津,300072 |
| |
| 摘 要： | 针对微小型平面零件给出了一种基于图像的轮廓度测量与评定方法.包括实现轮廓度测量的理论轮廓数据建模方法、对应理论点的扩展极角定界搜索方法以及满足最小条件的最小极偏差轮廓度误差评定方法.通过实例将最小极偏差轮廓度评定方法(LDM)与传统的最小二乘轮廓度评定方法(LSM)进行了分析和比较.结果证明,对于不同实际零件,最小极偏差评定方法较最小二乘评定方法收敛于最小值的迭代次数减少了0～3次,精度优化了4%～12.6%,可以满足微型零件高精度、高效率轮廓度检测的要求.
|
| 关 键 词： | 微型零件 轮廓度误差 图像处理 最小极偏差 最小二乘 |
Measurement and evaluation for profile tolerance based on images |
| |
| WANG Zhong,CAO Jing-jing,ZHANG Li-kun,ZHANG Jin.Measurement and evaluation for profile tolerance based on images[J].Optics and Precision Engineering,2009,17(2). |
| |
| Authors: | WANG Zhong CAO Jing-jing ZHANG Li-kun ZHANG Jin |
| |
| Affiliation: | State Key Laboratory of Precision Measuring Technology and Instruments of Tianjin University;Tianjin 300072;China |
| |
| Abstract: | A profile measurement and evaluation method for the micro-parts based on the images is presented.This method includes the method of profile data modeling in theory,bound searching method of expansion polar angle corresponding theoretical points and evaluation method of least-deviation profile error.The evaluation method of least deviation profile error and classical least-square profile error are analyzed and compared based on several examples.The experiments on actual image show that the iterative times of... |
| |
| Keywords: | |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
