| 不同牌号EPDM加工性能和物理性能研究 |
| |
| 引用本文： | 杜爱华,车永兴,张志广,程宝家.不同牌号EPDM加工性能和物理性能研究[J].橡胶工业,2011,58(9):545-549. |
| |
| 作者姓名： | 杜爱华 车永兴 张志广 程宝家 |
| |
| 作者单位： | 1. 青岛科技大学橡塑材料与工程教育部重点实验室,山东青岛,266042
2. 帝斯曼弹性体贸易(上海)有限公司,上海,200122 |
| |
| 摘 要： | 研究2个牌号(K8340A和K778Z) EPDM的加工性能和物理性能.结果表明:K8340A混炼胶的门尼粘度高于K778Z混炼胶,两种胶料的焦烧时间和正硫化时间接近；K8340A和K778Z混炼胶均表现出剪切变稀行为,K8340A混炼胶表现更显著；随着填充量的增大,EPDM硫化胶100％定伸应力略有增大,拉伸强度、拉断伸长率和撕裂强度减小；与K778Z硫化胶相比,K8340A硫化胶的100％定伸应力和拉伸强度相差不大,撕裂强度和拉断伸长率略低,压缩永久变形明显较小.
|
| 关 键 词： | EPDM 可控长链支化 加工性能 物理性能 |
Processability and Physical Properties of Different EPDMs |
| |
| DU Ai-hu,CHE Yong-xing,ZHANG Zhi-guang and CHENG Bao-jia.Processability and Physical Properties of Different EPDMs[J].China Rubber Industry,2011,58(9):545-549. |
| |
| Authors: | DU Ai-hu CHE Yong-xing ZHANG Zhi-guang and CHENG Bao-jia |
| |
| Affiliation: | DU Ai-hua1,CHE Yong-xing1,ZHANG Zhi-guang1,CHENG Bao-jia2[1.Qingdao University of Science and Technology,Qingdao 266042,China,2.DSM Trading(Shanghai) Co.,Ltd,Shanghai 200122,China] |
| |
| Abstract: | The processability and physical properties of EPDM(K8340A and K778Z) were investigated.The results showed that,the Mooney viscosity of K8340A compound was higher than that of K778Z,and they had similar scorch time and optimum curing time.Both compounds showed shear thinning behavior,and the shear thinning behavior of K8340A compound was more significant.With the increase of filler content,the modulus at 100% elongation of EPDM vulcanizates increased a little,but the tensile strength,elongation at break and ... |
| |
| Keywords: | EPDM controlled long chain branching processibility physical property |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《橡胶工业》浏览原始摘要信息 |
|
点击此处可从《橡胶工业》下载全文 |
|
