首页 | 本学科首页   官方微博 | 高级检索  
     

高能喷丸后TC4合金表面组织性能研究
引用本文:张聪惠,赵西成,兰新哲,何晓梅.高能喷丸后TC4合金表面组织性能研究[J].铸造技术,2006,27(10):1082-1084.
作者姓名:张聪惠  赵西成  兰新哲  何晓梅
作者单位:西安建筑科技大学,陕西,西安,710055
摘    要:利用高能振动喷丸法对TC4钛合金进行了表面细化的研究。用光镜、扫描电镜、透射电镜和硬度计等手段分析并研究其表层变形层金相组织、晶粒尺寸及显微硬度。结果表明,TC4钛合金经高能喷丸处理后,材料表面形成一定厚度的细化晶粒组织,且喷丸强度越高,表层平均晶粒尺寸越细、形变层越深;高能喷丸处理后,随距被处理表面距离增加,硬度增加程度越来越小,随喷丸时间延长表面硬度有增加趋势。

关 键 词:组织细化  TC4钛合金  高能喷丸  组织  硬度
文章编号:1000-8365(2006)10-1082-03
收稿时间:06 10 2006 12:00AM
修稿时间:09 12 2006 12:00AM

Microstructure and Properties of TC4 Titanium Alloy Surface Treated by High-energy Shot Peening
ZHANG Cong-hui,ZHAO Xi-cheng,LAN Xin-zhe,HE Xiao-mei.Microstructure and Properties of TC4 Titanium Alloy Surface Treated by High-energy Shot Peening[J].Foundry Technology,2006,27(10):1082-1084.
Authors:ZHANG Cong-hui  ZHAO Xi-cheng  LAN Xin-zhe  HE Xiao-mei
Abstract:A Microstructure refinement surface layer was obtained in TC4 Titanium Alloy surface treated by a high-energy shot peering(HESP) technique.The surface layers are characterized by means of optical microscope,TEM,SEM and micro-hardness testing machine.The results show that the higher the shot strength,the smaller the mean grain sizes in surface and the thicker the deformation layers;the surface microhardness decreased gradually from the surface to the centre,and with the treatment time increasing,the surface microhardness is inclined to increases.
Keywords:Microstructure refinement  TC4 titanium alloy  High-energy shot peening  Structure  Hardness
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号