| 汽车覆盖件模具快速响应设计的若干关键技术研究 |
| |
| 引用本文： | 郑清春,徐燕申,牛文铁,谢艳,常世平.汽车覆盖件模具快速响应设计的若干关键技术研究[J].机械设计,2003,20(1):33-36. |
| |
| 作者姓名： | 郑清春 徐燕申 牛文铁 谢艳 常世平 |
| |
| 作者单位： | 1. 天津大学机械工程学院,天津,300072
2. 天津汽车模具有限公司,天津,300401 |
| |
| 基金项目： | 天津市自然科学重大基金项目(003804711) |
| |
| 摘 要： | 通过对汽车覆盖件模具的结构分析，提出了基于模块化思想的汽车覆盖件模具快速设计技术，建立了其模块化产品系列和模块划分方法，利用知识工程（KBE）技术和参数化模板实现汽车覆盖件模具通用模块的快速设计，利用UG/WAVE技术和曲面重构技术实现了专用模块的快速设计。通过该快速设计系统，实现了汽车覆盖件模具产品的快速更新。
|
| 关 键 词： | 汽车覆盖件模具 快速响应设计 模块化设计 KBE技术 参数化模板 |
| 文章编号： | 1001-2354(2003)01-0033-03 |
Research on several key techniques of rapid responce design for dies of automobile covering parts |
| |
| ZHENG Qing chun ,XU Yan shen ,NIU Wen tie ,XIE Yan ,CHANG Shi ping.Research on several key techniques of rapid responce design for dies of automobile covering parts[J].Journal of Machine Design,2003,20(1):33-36. |
| |
| Authors: | ZHENG Qing chun XU Yan shen NIU Wen tie XIE Yan CHANG Shi ping |
| |
| Affiliation: | ZHENG Qing chun 1,XU Yan shen 1,NIU Wen tie 1,XIE Yan 1,CHANG Shi ping 2 |
| |
| Abstract: | By means of structural analysis upon dies of automobile covering parts a rapid designing technology for dies of automobile covering was put forward based on idea of modularization.Its modularized product series and module dividing method were established.By the use of KBE and parametrized template,the rapid design of general module for dies of automobile covering parts was achieved.Utilizing UG/WAVE technique and curved surface reconstruction technology the rapid design of special purpose module was realized.Through this rapid design system the quick renewal of dies product for automobile covering parts was accomplished. |
| |
| Keywords: | automobile covering dies rapid response design modularized design KBE technology parametrized template |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
