| 铝合金压铸模表面等离子喷涂强化的研究 |
| |
| 引用本文： | 赵建国,蒋辉,李建昌,樊云飞,郝建军.铝合金压铸模表面等离子喷涂强化的研究[J].表面技术,2012(6):82-84. |
| |
| 作者姓名： | 赵建国 蒋辉 李建昌 樊云飞 郝建军 |
| |
| 作者单位： | 河北农业大学机电工程学院, 保定071000,河北农业大学机电工程学院, 保定071000,河北农业大学机电工程学院, 保定071000,河北农业大学机电工程学院, 保定071000,河北农业大学机电工程学院, 保定071000 |
| |
| 基金项目： | 河北农业大学非生命学科与新兴学科科研发展基金 |
| |
| 摘 要： | 针对铝合金压铸模具极易出现点蚀、磨损以及脱模性能差等问题,采用等离子喷涂工艺在模具材料H13 钢基体上制备Al2O3-TiO2 陶瓷硬质涂层,通过正交试验优化了喷涂电流、喷涂电压、喷涂距离。分析结果表明:采用优化工艺对模具材料进行表面强化处理,显著改善了模具材料的硬度、耐磨性及脱模性,表面平均硬度最高可达976. 1HV,摩擦系数在0. 4 左右,浸高温铝液后的粘铝较少。
|
| 关 键 词： | 铝合金 压铸模 等离子喷涂 表面强化 脱模性能 |
| 收稿时间： | 2012/8/10 0:00:00 |
| 修稿时间： | 2012/12/20 0:00:00 |
Research on Surface Strengthening on Aluminum Alloy Die Casting Die |
| |
| ZHAO Jian-guo,JIANG Hui,LI Jian-chang,FAN Yun-fei and HAO Jian-jun.Research on Surface Strengthening on Aluminum Alloy Die Casting Die[J].Surface Technology,2012(6):82-84. |
| |
| Authors: | ZHAO Jian-guo JIANG Hui LI Jian-chang FAN Yun-fei and HAO Jian-jun |
| |
| Affiliation: | College of Mechanical and Electrical Engineering,Agricultural University of Hebei, Baoding 071000, China,College of Mechanical and Electrical Engineering,Agricultural University of Hebei, Baoding 071000, China,College of Mechanical and Electrical Engineering,Agricultural University of Hebei, Baoding 071000, China,College of Mechanical and Electrical Engineering,Agricultural University of Hebei, Baoding 071000, China and College of Mechanical and Electrical Engineering,Agricultural University of Hebei, Baoding 071000, China |
| |
| Abstract: | Aluminum alloy die casting die currently has a problem that the surface is easy to generate pitting, wear,poor knockout performance. In order to solve this problem, the Al2 O3 -TiO2 ceramic coating on mould H13 by plasma spraying was prepared. We have designed orthogonal experiment based on current, voltage and spraying distance and optimized spraying parameters. The results show that by surface strengthening with the optimized process, the hardness of Al2 O3 -TiO2 coating is 976. 1HV, the friction factor is about 0. 4. The coating wear hardness, wear resistance and knockout perfomance are improved significantly. |
| |
| Keywords: | aluminum alloy die casting mould plasma spraying surface strengthening knockout performance |
|
| 点击此处可从《表面技术》浏览原始摘要信息 |
|
点击此处可从《表面技术》下载全文 |
|
