|
|||||
|
|
| 转运站框架式厂房的爆破拆除 | |
| 引用本文： | 叶图强,陆鹏程,潘朋坤.转运站框架式厂房的爆破拆除[J].工程爆破,2002,8(2):33-35. |
| 作者姓名： | 叶图强 陆鹏程 潘朋坤 |
| 作者单位： | 1. 南宁建发爆破公司,南宁,530003 2. 广西火电建筑公司,柳州,545100 3. 广西火电建筑公司,南宁,545100 |
| 摘 要： | 合山电厂转运站待拆五层钢筋混凝土框架式厂房西侧与被保护的引风机房相隔仅 0 3m ,北侧与工具房相连 ,南侧与需要保护的油池相邻。爆破切口布置在二层 ,并把最后一排柱的爆破部位提高到引风机房顶部以上 0 5m处 ,避免了后坐对引风机房的影响。通过预处理 ,将厂房与工具房分离。架设防护结构 ,阻挡飞石 ,保护了油池。文中介绍了爆高和爆破参数的选择、预处理、起爆破网路设计和安全防护措施。 |
| 关 键 词： | 框架式建筑 爆破拆除 定向爆破 预处理 |
| 文章编号： | 1006-7051(2002)02-0033-03 |
| 修稿时间： | 2001年11月8日 |
BLASTING DEMOLITION OF A FRAME FACTORY BUILDING IN A TRANSFER STATION |
|
| YE Tu-qiang ,LU Peng-cheng ,PAN Peng-kun.BLASTING DEMOLITION OF A FRAME FACTORY BUILDING IN A TRANSFER STATION[J].Engineering Blasting,2002,8(2):33-35. | |
| Authors: | YE Tu-qiang LU Peng-cheng PAN Peng-kun |
| Affiliation: | YE Tu-qiang 1,LU Peng-cheng 2,PAN Peng-kun 3 |
| Abstract: | The 5-storeyed reinforced concrete frame building to be demolished in the transfer station of Heshan power plant is only 0.3m away from a fan house in western side,connected with a tool room in northern side and adjacent to an oil-storage necessary to be protected in southern side.The blasting cut was arranged on second floor and the blasting points on the end row of posts were risen to 0.5m over the roof of the fan house,avoiding the effect of the recoil on the fan house.Through pre-treatment,the building was separated from the tool room.An erected protection structure was used to resist the flying rocks,protecting the oil-storage.In this paper,selection of blasting cut height and parameters,pre-treatment,design of priming circuit and safety precaution measures were introduced. |
| Keywords: | Frame building Blasting demolition Directional blasting Pre-treatment |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |