A fretting-fatigue damage threshold concept

Fretting fatigue studies were conducted on Ti-6Al-4V and 7075-T6 aluminum specimens cycled in axial fatigue loading at a fatigue ratio (R) of +0.1. Axial fatigue loading was applied at a frequency of 30 Hz in a laboratory environment with the fretting applied to the specimen central section through a fretting pad made of the same material as the fatigue specimen. Tests were conducted at various maximum axial fatigue loads and normal pressures.The fretting damage that occurred resulted in a significant reduction in fatigue life. The reduction in fatigue strength was greater for both materials studied in the long life region. A fretting fatigue damage threshold that results from the fretting was found to exist for both materials. At all load levels a given amount of fretting damage is required before any fatigue life reduction occurs. Presumably the damage leads to the development of cracks in the fretted areas. The concept of the fretting damage threshold is related to the development of an initial crack that causes the local stress intensity to exceed the threshold value at a much smaller number of applied cycles. Thus, the concepts of fracture mechanics are related to the “initiation” of fretting damage.