|
|||||
|
|
| 杯形件温引伸数值模拟 | |
| 引用本文： | 张宝红,张治民,张星,王强,李大旭. 杯形件温引伸数值模拟[J]. 塑性工程学报, 2004, 11(3): 86-88,92 |
| 作者姓名： | 张宝红 张治民 张星 王强 李大旭 |
| 作者单位： | 1. 华北工学院,材料工程系,太原,030051 2. 中国兵器工业集团公司618厂,北京,100071 |
| 摘 要： | 用MARC/AutoForge软件对杯形件温引伸工艺进行了数值模拟 ,分析了凹模锥角及凸、凹模与工件之间摩擦系数对引伸工艺的影响 ,为杯形件温引伸工艺的制定提供了依据。 |
| 关 键 词： | 杯形件 温引伸 数值模拟 |
| 文章编号： | 1007-2012(2004)03-0086-03 |
| 修稿时间： | 2003-01-08 |
Numerical simulation of warm drawing of cup |
|
| ZHANG Bao-hong ZHANG Zhi-ming ZHANG Xing WANG Qiang. Numerical simulation of warm drawing of cup[J]. Journal of Plasticity Engineering, 2004, 11(3): 86-88,92 | |
| Authors: | ZHANG Bao-hong ZHANG Zhi-ming ZHANG Xing WANG Qiang |
| Abstract: | The warm drawing of cup is simulated by the FEM software MARC/AutoForge. At the basis of simulation results, the influences of drawing angle, friction coefficient between female die, punch and workpiece on the warm drawing of cup has been analyzed. The investigations provide basic foundations for the choosing of warm drawing process parameter of cup. |
| Keywords: | cup warm drawing numerical simulation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |