| PBT/PET共聚酯的结晶和熔融 |
| |
| 引用本文： | 曾凡龙,金惠芬.PBT/PET共聚酯的结晶和熔融[J].合成纤维工业,1990,13(4):35-39. |
| |
| 作者姓名： | 曾凡龙 金惠芬 |
| |
| 摘 要： | 研究了 PBT/PET 共聚酯的球晶形态、等温结晶动力学和热历史对其 DSC 曲线的影响。结果表明:在120℃下,随着共聚酯中 PBT 含量的增加,共聚酯的球晶形态有很大差异,结晶动力学参数 n,k,t_(1/2)~(-1)增大。经不同的温度热处理,共聚酯在 DSC 曲线上出现两个熔融峰。低温峰对应于不完善的结晶,高温峰属于在 DSC 的升温过程中形成的较完善的结晶。
|
| 关 键 词： | PBT PET 共聚酯 聚酯 结晶 熔融 |
CRYSTALLIZATION AND MELT OF PBT/PET COPOLYESTER |
| |
| Abstract: | PBT/PET copolyester has been studied in spherulitic structure,isothermal crysta-llization kinetics and the influence of heat history on DSC curves.The result showthat as the increasing of PBT content in the copolyester,its spherulitic structu-res are much different,its kinetic parameters n,k,t_(1/2)~(-1)increase.Two meltingpeaks occur on the DSC curves after it is subjected heat treatment under varioustemperatures.The lower temperature melting peak is due to the melting of imperf-ect crystal,and the higher temperature peak corresponds to the melting of thebetter crystal. |
| |
| Keywords: | |
| 本文献已被 维普 等数据库收录！ |
|
