| 基于Pro/E二次开发的模型抽取技术 |
| |
| 引用本文： | 张利强,刘刚,顾翠,章翔峰.基于Pro/E二次开发的模型抽取技术[J].导弹与航天运载技术,2011(2):58-61. |
| |
| 作者姓名： | 张利强 刘刚 顾翠 章翔峰 |
| |
| 作者单位： | 北京神舟航天软件技术有限公司; |
| |
| 基金项目： | 国家科技支撑计划资助项目(2006BAF01A04) |
| |
| 摘 要： | 为了实现从复杂的装配体中抽取部分零部件进行CAE分析,同时保持被抽取零部件的空间位置关系不变。利用VC2005开发环境和Pro/E自带的Pro/ToolKit开发模块进行二次开发,在Pro/E非可视化的条件下将Pro/E模型导入内存,重新组合生成新装配体进行实时预览,并将预览合适的新装配体按照指定文件格式保存。结合虚拟火箭案例,验证了复杂模型抽取的可行性和实用性,提高了分析模型抽取、装配的效率和通用性。
|
| 关 键 词： | Pro/E模型 二次开发 Pro/Toolkit 模型抽取 |
Model Extraction Technique Based on Further Development of Pro/Engineer |
| |
| Zhang Liqiang,Liu Gang,Gu Cui,Zhang Xiangfeng.Model Extraction Technique Based on Further Development of Pro/Engineer[J].Missiles and Space Vehicles,2011(2):58-61. |
| |
| Authors: | Zhang Liqiang Liu Gang Gu Cui Zhang Xiangfeng |
| |
| Affiliation: | Zhang Liqiang,Liu Gang,Gu Cui,Zhang Xiangfeng(Beijing Shenzhou Aerospace Software Technology Co.,Ltd,Beijing,100094) |
| |
| Abstract: | In order to analyze extracted parts from the complex assembly in CAE while the parts positions are kept unchanged,this paper tries to utilize VC2005 development environment and Pro/ToolKit Development Module of Pro/Engineer for further development in which the Pro/E model is loaded into computer memory in Pro/E without visualization to regenerate a new assembled body to get a real-time preview.If appropriate,the new assembled body will be saved as a file in specified format.By way of simulated rocket,feasib... |
| |
| Keywords: | Pro/Engineer model Further development Pro/Toolkit Model extraction |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
