| 基于SG/Simulink感应电机混合建模仿真研究 |
| |
| 引用本文： | 陈娅冰,周治平,纪志成.基于SG/Simulink感应电机混合建模仿真研究[J].微电机,2005,38(2):35-38. |
| |
| 作者姓名： | 陈娅冰 周治平 纪志成 |
| |
| 作者单位： | 江南大学电气传动研究所,无锡,214036 |
| |
| 摘 要： | 采用SG/Simulink软件,提出一种对感应电机控制系统进行混合建模仿真的新方法.该方法利用SG (System Generator)建立的控制器仿真模型可以直接生成相应VHDL代码,为在FPGA平台上实现控制器算法设计奠定了基础.它使得FPGA设计建模与实现建模可一次性完成,缩短了FPGA产品的开发周期.而采用Simulink搭建的感应电机本体模声则具有通用性,对应于不的情况只需修改替换部分模块.仿真结果验证了该方法的有效性和可行性,为实际电机控制系统的设计和调试提供了新的思路.
|
| 关 键 词： | 混合建模 仿真 感应电动机 |
| 文章编号： | 1001-6848(2005)02-0035-04 |
| 修稿时间： | 2004年9月9日 |
Research on Hybrid Modeling and Simulation of Induction Motor Based on SG/Simulink |
| |
| CHEN Ya-bing,ZHOU Zhi-ping,JI Zhi-cheng.Research on Hybrid Modeling and Simulation of Induction Motor Based on SG/Simulink[J].Micromotors,2005,38(2):35-38. |
| |
| Authors: | CHEN Ya-bing ZHOU Zhi-ping JI Zhi-cheng |
| |
| Abstract: | The paper presents a novel approach for hybrid modeling and simulation of Induction motor control system by SG (System Generator) and Simulink.The specialized SG tools used and the design procedure are presented.When the control algorithm is to be implemented in an FPGA,SG tool can be used not only to simulate exactly the hardware but also to automatically generate the necessary VHDL code from the control model.The reasonability and validity have been testified by the simulation results and this novel method offers a new throughway for designing and debugging actual motors. |
| |
| Keywords: | hybrid modeling Simulation Induction motor |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
