首页 | 本学科首页   官方微博 | 高级检索  
     

耐盐性AM/AA/MMT复合吸水材料合成条件改进研究
引用本文:刘永兵,蒲万芬,杨小松.耐盐性AM/AA/MMT复合吸水材料合成条件改进研究[J].钻采工艺,2004,27(4):88-90.
作者姓名:刘永兵  蒲万芬  杨小松
作者单位:西南石油学院石油工程系
摘    要:以丙烯酰胺(AM)、丙烯酸(AA)为原料,以蒙脱土(MMT)为无机添加剂,采用水溶液聚合法合成了耐盐性AM/AA/MMT复合吸水材料,优化改进了其合成条件。结果表明,优化的合成条件是:单体AM和从的质量配比为6/1,MMT用量为7.5wt%,交联剂浓度为0.08wt%,水溶液pH值为6,引发剂浓度为0.07wt%。吸水材料在10%NaCl溶液中吸液率达64倍,在15%NaCl溶液中吸液率达45倍,在20%NaCl溶液中吸液率33倍。

关 键 词:吸水材料  合成技术  丙烯酰胺  丙烯酸  蒙脱土  MMT  无机添加剂  注水开发工艺
文章编号:1006-768X(2004)04-0088-02
修稿时间:2003年6月11日

Study on Synthesis Conditions of Acrylamide/Acrylic Acid/Montmorillonite Salt - tolerant Complex Water- absorbent
LIU Yongbing,PU Wanfen and YANG Xiaosong.Study on Synthesis Conditions of Acrylamide/Acrylic Acid/Montmorillonite Salt - tolerant Complex Water- absorbent[J].Drilling & Production Technology,2004,27(4):88-90.
Authors:LIU Yongbing  PU Wanfen and YANG Xiaosong
Abstract:The acrylamide/acrylic acid/montmorillonite salt-tolerant complex water-absorbent was synthesized by water solution copolymerization using acrylamide and acrylic acid as raw materials,montmorillonite as inorganic filler.The synthesis conditions were improved.Optimum conditions were:mass ratio of acrylamide/acrylic acid is 6/1,amount of montmorillonite is 7.5wt%,concentration of cross-linking agent is 0.08wt%,pH of water solution is 6,amount of initiator is 0.07wt%,salt-water absorbency was up to 64g.g -1in 10%NaCl solution ,45g.g -1in 15%NaCl solution,33g.g -1in 20%NaCl solution.
Keywords:salt-tolerance  acrylamide/acrylic acid/montmorillonite  complex water-absorbent  improvement
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号