| 金刚石线锯锯切微晶玻璃正交试验研究 |
| |
| 引用本文： | 杨扬,左敦稳,孙玉利,杨张一,童巨特.金刚石线锯锯切微晶玻璃正交试验研究[J].金刚石与磨料磨具工程,2012,32(1):4-7. |
| |
| 作者姓名： | 杨扬 左敦稳 孙玉利 杨张一 童巨特 |
| |
| 作者单位： | 南京航空航天大学机电学院,南京,210016 |
| |
| 基金项目： | 中国博士后科学基金特别资助金，中国博士后科学基金，江苏省博士后科研资助计划，南京 航空航天大学基本科研业务费专项科研，南京航空航天大学研究生创新基地(实验室)开放基金 |
| |
| 摘 要： | 对电镀金刚石线锯锯切微晶玻璃的工艺参数进行了试验优化研究。设计了3因素4水平的正交试验,分析了工件进给速度、锯丝线速度和气缸压力对切片表面粗糙度和锯切效率的影响,获得了基于降低表面粗糙度和提高锯切效率的锯切工艺参数。在本试验范围内,优化的工艺参数为:工件进给速度0.75 mm/min、锯丝线速度1.7 m/s,气缸压强0.26 MPa。
|
| 关 键 词： | 金刚石线锯 微晶玻璃 正交试验 |
Experimental research on cutting of nucleated glass with diamond wire saw based on Taguchi method |
| |
| YANG Yang
,
ZUO Dun-wen
,
SUN Yu-li
,
YANG Zhang-yi
,
TONG Ju-te.Experimental research on cutting of nucleated glass with diamond wire saw based on Taguchi method[J].Diamond & Abrasives Engineering,2012,32(1):4-7. |
| |
| Authors: | YANG Yang ZUO Dun-wen SUN Yu-li YANG Zhang-yi TONG Ju-te |
| |
| Affiliation: | ( Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China) |
| |
| Abstract: | The process parameter optimization experiment was carried out on nucleated glass by using electroplated diamond wire saw. Experiment of three factors and four levels is designed based on Taguchi method. The effects of the work piece feed rate, cutting speed and cylinder pressure on the glass surface roughness and cutting efficiency were analyzed. The optimized cutting parameters based on reducing the surface roughness and improving cutting efficiency were obtained, which are： work piece feed rate 0.75 mm/min, cutting speed 1.7 m/s and cylinder pressure 0.26 MPa. |
| |
| Keywords: | diamond wire saw nucleated glass Taguchi method |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
