| 基于ADAMS的三维织机平行打纬机构的设计研究 |
| |
| 引用本文： | 韩斌斌,王益轩,陈荣荣,梁瑜洋,高丹.基于ADAMS的三维织机平行打纬机构的设计研究[J].产业用纺织品,2015(10):22-26. |
| |
| 作者姓名： | 韩斌斌 王益轩 陈荣荣 梁瑜洋 高丹 |
| |
| 作者单位： | 西安工程大学机电工程学院，西安，710048 |
| |
| 基金项目： | 陕西省教育厅产业化培育项目 |
| |
| 摘 要： | 采用ADAMS软件,对几种不同形式的六连杆平行打纬机构进行仿真设计。由仿真分析可知,这几种形式的打纬机构不仅能满足打纬工艺要求,而且具有各自的特点,可供织制不同织物品种的织机选用。仿真分析为三维织机打纬机构的设计提供了方便实用的方法。
|
| 关 键 词： | 三维织机 平行打纬机构 六连杆机构 ADAMS |
Design of the parallel beating-up mechanism for 3 D weaving machine based on ADAMS |
| |
| Abstract: | Based on ADAMS, the simulation design for several different forms of six-bar parallel beating-up mechanisms has been done. The simulation analysis shows these several forms of beating-up mecha-nisms not only meet the process requirements of beating-up, but also have their own characteristics, which can be used by weaving machines for weaving different 3D fabrics. Simulation analysis provides a convenient and practical method for the design of beating-up mechanism of 3D weaving machine. |
| |
| Keywords: | 3D weaving machine parallel beating-up mechanism six-bar mechanism ADAMS |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
